Skip to content
FYB

FYB FIP-5070 – FIP-52000 IP PA amplifier

Model
FYB-436841

Rack-mount IP amplifier for a PA zone: 70 to 2000 W, outputs for a 70/100 V line or 4–16 Ω speakers, with audio arriving over the network.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
AC220 V/50 Hz-60 Hz
Frequency response
±2db (60 – 18 kHz)
Operating temperature
5 °C~40 °C
Output modes
4 – 16Ω constant resistance output, 70 V/100 V constant voltage output
All specifications

Description

FYB FIP-5070 – FIP-52000: a series of IP PA amplifiers from 70 to 2000 W for the FYB 500 series cloud PA system. Network decoder and power amplifier share one case: the amplifier goes in the zone equipment room, and speakers in halls, corridors and outdoor areas are wired to the 70 V/100 V or 4–16 Ω output.

  • Protection against DC at the output, overload, overheating and short circuit.
  • 60 Hz – 18 kHz (±2 dB), signal-to-noise ratio of at least 81 dB (86 dB weighted), distortion no more than 1 %.
  • Audio mixing: an announcement plays over the music, which carries on at a lower level.
  • Optional 2 GB eMMC backup memory, so scheduled programmes still play if the network drops.
  • Volume, rights and zone groups set from the platform, with amplifier status reported back.
  • Standby consumption under 3 W.

19" rack case, 220 V mains. The model is chosen from the total of the speakers in the zone when audio and public address systems are designed.

Specifications

Communication
Ethernet100 Mbps
ProtocolsRTP/TCP/IP, UDP
Power
Power supplyAC220 V/50 Hz-60 Hz
Electrical protectionProtection circuit: DC output, overload, over temperature, short circuit protection circuit; Protection: AC FUSE*T20 A × 1
Standby power consumption<3 W
Power cord(3 × 1.5 mm)*1.5M (standard)
Audio
Frequency response±2db (60 – 18 kHz)
Signal-to-noise ratioBroadband signal-to-noise ratio: ≥81db; Weighted SNR: ≥86db
Total harmonic distortion≤1%
Sampling rate8K~48KHz
Audio bitrate8K~512 Kbps
Audio formatsMP3/MP4/MKV/FLC/WAV (the original file is played, and the sound quality reaches CD level)
Output modes4 – 16Ω constant resistance output, 70 V/100 V constant voltage output
Physical and environment
Mountingrack installation
Operating temperature5 °C~40 °C
Operating humidity20% to 80% relative humidity, no condensation

FAQ

What's the difference between Cloud PA system and traditional PA system?

Traditional PA systems work locally in one building, require central amplifier and audio cables to each speaker. Cloud PA system works on IP network and internet – each speaker is an IP device connected to cloud server. This allows managing multiple sites (branches in different cities) from single platform, adding new speakers without cables, and controlling from smartphone.

Can Cloud PA system integrate with other systems?

Yes, 500 Series Cloud PA system integrates with: SIP/VoIP telephony (call to any zone), fire alarm systems (automatic evacuation announcements), access control (intercom at doors), video surveillance (video intercom), BMS building management systems (centralized control). API integration is supported.

How secure is Cloud PA system?

500 Series Cloud PA system uses AES-256 encryption for audio streams, TLS/SSL protocol for communication, and two-factor authentication (2FA) on management platform. Data is stored on encrypted cloud servers. System supports VPN connection and local backup server (if internet goes down, system continues working on local network).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.