FYB FY-2240B two-channel PA power amplifier
- Model
- FY-2240B
- SKU
- FYB-88483
Two-channel 2 × 240 W power amplifier for commercial and industrial sites: separate 70 V, 100 V and 4–16 Ω outputs, 620 W consumption.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Frequency response
- 60-15KHz
- Rated power output
- 2×240W
- Power supply
- AC230V or 110V, 50-60Hz
- Dimensions
- 484x366x88mm
Description
The FYB FY-2240B is a two-channel PA power amplifier rated at 2 × 240 W for commercial and industrial public address systems. The channels are independent: each can serve a separate zone or a different type of speaker.
A 100 V or 70 V line carries many speakers with transformers on one cable. A 4–16 Ω output suits ordinary low-impedance speakers. Each channel offers both, so a single amplifier is enough for, say, a line of ceiling speakers in the corridors plus a pair of speakers in a hall.
Design
- Two unbalanced RCA inputs and separate channel volume controls.
- Isolating transformer for electrical safety.
- Protection against overheating, overload, short circuit and clipping, with fan switch-on at 55 °C.
- Power, signal, clip, protection and temperature indicators.
60 Hz – 15 kHz response, signal-to-noise ratio of 85 dB or more. 230 V or 110 V mains, 620 W consumption, 24 V DC backup input on request. 2U case, 484 × 366 × 88 mm, 13.8 kg. Channel loads are worked out when audio and public address systems are designed.
Specifications
| Power consumption | 620W |
|---|---|
| Electrical protection | Temp, overload, short circuit & clip |
| Power supply | AC230V or 110V, 50-60Hz |
| Frequency response | 60-15KHz |
|---|---|
| Rated power output | 2×240W |
| Signal-to-noise ratio | ≥85dB |
| Total harmonic distortion | Less than 0.5% at 1KHz, 1/3 rated power |
| Inputs | unbalanced two RCA line inputs |
| Outputs | 100V, 70V, 4-16Ω |
| Cooling | Fan auto open when internal temp reaches 55°C |
| Net weight | 13.8kg |
|---|---|
| Dimensions | 484x366x88mm |
FAQ
What's the difference between a power amplifier and a mixer amplifier?
Power amplifier – only amplifier (no mixer), 1-2 inputs (line level, balanced XLR), no volume control on inputs, no priority function, high power (350W-2000W), 40-200+ speakers, requires separate pre-amplifier or mixer for microphones and volume control, ideal for large facilities (shopping malls, airports, stadiums), professional systems, rack mount design (19" rack). Mixer amplifier – integrated all-in-one (mixer + amplifier), 4-12 inputs (microphones, line inputs), volume/bass/treble control on each input, priority function, medium power (60W-650W), 6-80 speakers, doesn't require separate mixer, ideal for small-medium facilities (stores, schools, restaurants), all-in-one solution. Recommendation: power amplifier – large facilities (>80 speakers), professional systems, separate mixer. Mixer – small-medium facilities (<80 speakers), all-in-one solution.
What is bridge mode and parallel mode and when to use them?
Bridge mode and Parallel mode are special configurations allowing you to change amplifier operation mode. Bridge mode (bridged mono) – combines 2 channels into one powerful channel, doubled power (example: 2× 500W → 1× 1000W), used when very high power needed for one zone, ideal for large spaces (100-200 speakers in one zone), connection: + channel 1, - channel 2. Parallel mode – combines 2 channels in parallel, same power but doubled speaker quantity (example: 2× 500W → 2× 500W but each channel can power 2x more speakers), used when more speakers needed than one channel can handle, ideal for multi-zone systems (2 zones with same power), connection: both channels in parallel. When to use: 1) Bridge mode – when very high power needed for one zone (>100 speakers), large spaces, one zone. 2) Parallel mode – when more speakers needed than one channel can handle, multi-zone systems, 2 zones with same power. 3) Normal mode (stereo) – when 2 independent zones with different power needed, multi-zone systems. Recommendation: most common mode is Normal mode (stereo), Bridge mode used rarely (for very large spaces).
How do I connect a power amplifier?
Connecting a power amplifier requires a pre-amplifier or mixer. Steps: 1) Pre-amplifier/Mixer connection – connect pre-amplifier or mixer output (line output, balanced XLR or RCA) to power amplifier input (input, balanced XLR), use balanced XLR cable (better sound quality, less noise). 2) speaker connection – connect speaker cable (2-core, 2.5mm² or 4mm² for high power) from amplifier 100V/70V outputs to speakers (parallel connection, all speakers in parallel). 3) speaker configuration – on each 100V speaker select power (tap selector: 3W/6W/10W/20W), ensure total power doesn't exceed amplifier power on each channel. 4) Gain adjustment – adjust gain (input sensitivity) on each channel (typically 0dB to +20dB), start from 0dB and increase if needed. 5) testing – turn on system, verify all speakers work, ensure no distortion, check protection LEDs (shouldn't be lit). 6) Rack mount – install amplifier in 19" rack (2U-3U space), leave 1U space above and below for ventilation. Recommendation: always use balanced XLR cables from pre-amplifier to amplifier (better sound quality, less noise).
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.