FYB FY-616 audio processor, 16 × 16
- Model
- FY-616
- SKU
- FYB-392283
Matrix DSP processor with 16 inputs and 16 outputs: two USB channels for playback and two for recording, automatic mixer, control over LAN, RS232 and RS485.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- AC 110~240 V, 50 Hz/60 Hz
- Frequency response
- ±0.2 dB
- Dimensions
- 482 × 260 × 45(mm)
Description
The FYB FY-616 is a matrix audio processor (DSP) with 16 analogue inputs and 16 outputs in a 482 × 260 × 45 mm case. Microphones and sources go to the inputs, and the matrix distributes the signal to the outputs: zones, amplifiers, recording.
What is processed
- DSP automation: AGC (automatic gain), AFC (feedback suppression), AEC (echo cancellation), ANC (noise reduction), AMC (automatic mixing).
- Each input: pre-amp with 0–43 dB gain, 48 V phantom power, expander, compressor, 8-band parametric EQ, signal generator.
- Each output: 8-band EQ, delay, phase invert, crossover, five filter types, compressor.
Connections
- Phoenix terminals, Mic/Line inputs, +18 dBu maximum output level.
- USB: two digital PCM channels each for playback and recording.
- LAN, RS232, RS485, 4 GPIO and a 12 V DC connector; control of third-party equipment and camera tracking.
- Software for Windows, iOS and Android: 16 scenes and user rights.
24-bit / 48 kHz conversion, latency under 3 ms, 113 dB dynamic range, 0.003 % distortion. 110–240 V mains, 3 kg gross. Processing and routing are programmed for the room during audio and public address installation.
Specifications
| Interference rejection | 80 dB |
|---|
| Power supply | AC 110~240 V, 50 Hz/60 Hz |
|---|
| Input impedance | 9.4KΩ |
|---|---|
| Frequency response | ±0.2 dB |
| Total harmonic distortion | 0.003% @4dBu |
| Crosstalk | 108 dB |
| Dynamic range | 113 dB |
| Sampling rate | 48K/24bit |
| Output level | Output level: 0/-6 dB; Maximum level: +18dBu |
| Output impedance | 102Ω |
| Gain | 0/10/20/30/40/43 dB |
| Noise floor | Noise Floor (A-Weighted-Analog): -89dBu; Noise Floor (A-Weighted-Dante): -91dBu |
| Latency | <3ms |
| Phantom power | +48 V |
| Channels | 16 in 16 out |
| Dimensions | 482 × 260 × 45(mm) |
|---|---|
| Gross weight | 3KG |
FAQ
Why is audio processor needed in PA system?
Audio processor is essential in professional PA systems for several reasons: 1) acoustic correction – EQ eliminates room acoustic problems (resonances, echo), 2) feedback prevention – automatic feedback suppressor, 3) speaker protection – limiter protects speakers from excessive power, 4) zone control – matrix routing for different zones, 5) sound quality improvement – compressor, EQ, delay.
What's the difference between analog and digital audio processors?
Analog processors use analog circuits (op-amps, capacitors) – limited functionality, manual adjustment, noise. Digital processors (DSP) use digital signal processing – unlimited functionality (EQ, compressor, echo canceller, routing), PC/Mac software control, preset storage, precise parameters, no noise. Modern systems use only digital processors.
Can audio processor integrate with Dante network audio?
Yes, modern audio processors support Dante/AES67 network audio – this allows transmitting audio signals over IP network (LAN/WAN) without analog cables. Dante network provides low latency (<1ms), high quality (24-bit/96kHz), and simple scaling (hundreds of channels in one network). Integration: Dante audio processor + Dante amplifiers + Dante microphones + Dante mixer.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.