Skip to content
FYB

FYB FYA-1616 audio processor, 16 × 16

Model
FYA-1616
SKU
FYB-392287

Matrix DSP processor with 16 analogue inputs and 16 outputs: sound processing and routing, automatic mixer, control from a computer or smartphone.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
AC 110~240 V, 50 Hz/60 Hz
Frequency response
±0.2 dB
Dimensions
482 × 260 × 45(mm)
All specifications

Description

The FYB FYA-1616 is a matrix audio processor (DSP) with 16 analogue inputs and 16 outputs. The matrix routes any input to any output; DSP stands for digital signal processing, which puts equalisers, compressors and feedback and echo suppression in one unit.

Processing

  • Automatic functions: AGC (automatic gain control), AFC (feedback suppression), AEC (echo cancellation), ANC (noise reduction), AMC (automatic mixing).
  • Inputs: pre-amp with 0–43 dB gain, 48 V phantom power, signal generator, expander, compressor, 8-band parametric EQ, ducker, automatic mixer.
  • Outputs: 8-band EQ, delay, phase invert, crossover, five filter types, compressor.
  • Channel LINK and grouping.

Connections and control

  • Phoenix terminals, Mic/Line inputs.
  • Front-panel USB for playback and recording, one digital PCM channel each way.
  • LAN, RS232, RS485, 8 GPIO and a 12 V DC connector; control of third-party equipment and camera tracking control.
  • Software for Windows, iOS and Android: 16 scene presets, multi-level user rights.

24-bit / 48 kHz conversion, latency under 3 ms, 113 dB dynamic range, 0.003 % distortion, +24 dBu maximum level. 110–240 V mains, 482 × 260 × 45 mm. Processing is set up for the room during audio and public address installation.

Specifications

Communication
Interference rejection80 dB
Power
Power supplyAC 110~240 V, 50 Hz/60 Hz
Audio
Input impedance9.4KΩ
Frequency response±0.2 dB
Total harmonic distortion0.003% @4dBu
Crosstalk108 dB
Dynamic range113 dB
Sampling rate48K/24bit
Output levelOutput level: 0/-6 dB; Maximum level: +24dBu
Output impedance102Ω
Gain0/10/20/30/40/43 dB
Noise floorNoise Floor (A-Weighted-Analog): -89dBu; Noise Floor (A-Weighted-Dante): -91dBu
Latency<3ms
Phantom power+48 V
Channels16 in 16 out
Physical and environment
Dimensions482 × 260 × 45(mm)
Gross weight3KG

FAQ

Why is audio processor needed in PA system?

Audio processor is essential in professional PA systems for several reasons: 1) acoustic correction – EQ eliminates room acoustic problems (resonances, echo), 2) feedback prevention – automatic feedback suppressor, 3) speaker protection – limiter protects speakers from excessive power, 4) zone control – matrix routing for different zones, 5) sound quality improvement – compressor, EQ, delay.

What's the difference between analog and digital audio processors?

Analog processors use analog circuits (op-amps, capacitors) – limited functionality, manual adjustment, noise. Digital processors (DSP) use digital signal processing – unlimited functionality (EQ, compressor, echo canceller, routing), PC/Mac software control, preset storage, precise parameters, no noise. Modern systems use only digital processors.

Can audio processor integrate with Dante network audio?

Yes, modern audio processors support Dante/AES67 network audio – this allows transmitting audio signals over IP network (LAN/WAN) without analog cables. Dante network provides low latency (<1ms), high quality (24-bit/96kHz), and simple scaling (hundreds of channels in one network). Integration: Dante audio processor + Dante amplifiers + Dante microphones + Dante mixer.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.