Skip to content
FYB

FYB 2-channel professional power amplifier, 2 × 300 – 2 × 1600 W

Model
FYB-543732

Two-channel professional power amplifier for 8 and 4 Ω speakers: a series from 2 × 300 to 2 × 1600 W with balanced XLR inputs.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
185-240 V 50/60HZ
Rated power output
Rated power stereo/parallel mode, 8 ohm load: 300 W × 2; Rated power stereo/parallel mode, 4 ohm load: 480 W × 2; Rated bridge power (8Ω): 600 W × 1
Frequency response
20-20KHZ <±0.1 dB
Dimensions
485 × 410 × 89 mm
Operating temperature
working temperature: -10 °C-40 °C, storage temperature: -25 °C-80 °C
Rated impedance
>4Ω
All specifications

Description

A series of FYB two-channel professional power amplifiers from 2 × 300 to 2 × 1600 W. The load is 8 or 4 Ω speakers; in bridge mode both channels are combined to drive one speaker. The figures below are for the 2 × 300 W model.

  • 8 Ω: 2 × 300 W; 4 Ω: 2 × 480 W; bridged into 8 Ω: 600 W.
  • Balanced XLR input sockets, input impedance 20 kΩ balanced and 10 kΩ unbalanced.
  • 20 Hz – 20 kHz ±0.1 dB, distortion under 0.05 %, intermodulation distortion under 0.04 %, signal-to-noise ratio above 100 dB.
  • Damping factor of 300 or more, slew rate of 40 V/µs or more.
  • Protection against short circuit, overheating, overload, undervoltage and DC at the output.

185–240 V mains, 1100 W consumption. 485 × 410 × 89 mm, 10 kg, operating range -10 to 40 °C. Amplifier power is matched to the speakers and the room when audio and public address systems are designed.

Specifications

Power
Power supply185-240 V 50/60HZ
Power consumption1100 W
Electrical protectionshort circuit, overheating, overload, undervoltage, output DC
Audio
Rated power outputRated power stereo/parallel mode, 8 ohm load: 300 W × 2; Rated power stereo/parallel mode, 4 ohm load: 480 W × 2; Rated bridge power (8Ω): 600 W × 1
InputsXLR female socket
Input impedancenormal operating conditions, 1HZ 20Kohms balanced input, 10Kohms unbalanced input
OutputsOhmXLR
Frequency response20-20KHZ <±0.1 dB
Total harmonic distortion<0.05%
Rated impedance>4Ω
Input sensitivitysingle channel operation, 8Ω load (0.5-1.44VdB)V
Damping factorsingle channel operation, 8Ω load 400HZ (≥300)
Slew ratesingle channel operation, 8Ω load 10HZ square wave (≥40 V/us)
Physical and environment
Dimensions485 × 410 × 89 mm
Net weight10Kg
Operating temperatureworking temperature: -10 °C-40 °C, storage temperature: -25 °C-80 °C

FAQ

What's the difference between Class D and Class AB amplifiers?

Class AB amplifiers – traditional technology, analog amplification, high sound quality (THD <0.01%), but low efficiency (60-70%), heavy weight (20-40kg), strong heating (requires large heatsink). Class D amplifiers – modern technology, digital amplification (PWM), high efficiency (>90%), light weight (5-15kg), low heating, but slightly higher distortion (THD <0.1%). Recommendation: Class D – modern choice (light, efficient, cheap), Class AB – for audiophiles (highest quality).

How does Bridge mode work in professional amplifier?

Bridge mode (also known as Bridged Mono, BTL) allows combining two channels into one mono channel with double power – normal mode: 2 channels × 1000W = 2000W (stereo), Bridge mode: 1 channel × 2000W = 2000W (mono). Application: large subwoofers (require high power), large halls (one powerful channel), mono PA systems. Connection: channel 1 + → speaker +, channel 2 + → speaker -, on amplifier enable Bridge mode (usually button or DIP Switch). Warning: in Bridge mode speaker impedance must be double (if normally 4Ω → in Bridge mode 8Ω).

Can professional amplifier be remotely controlled?

Yes, modern professional amplifiers support remote control – Ethernet connection (control in local network or via internet, Web interface, PC/Mac/iOS/Android app), RS-485 connection (simultaneous control of multiple amplifiers with one cable, distance 1200m), Dante/AES67 (digital audio network). Remote control functions: volume level adjustment (Gain), DSP parameters (equalizer, Limiter, Crossover), Bridge/Parallel mode enable, monitoring (power, temperature, load), Firmware update. This is ideal for large facilities – centralized control for all amplifiers.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.