Skip to content
FYB

FYB LA-110/LA-110B line array with active subwoofer

Model
LA-110B
SKU
FYB-270843

Line array with an active 18" subwoofer: the LA-110B has a built-in class-D amplifier and DSP for the passive LA-110 modules with a 10" driver.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
220 V ~50 Hz
Rated power output
Rated power (AES): LF 350 W / HF 100 W; Rated power (AES): 800 W; Output power: USB/1300 W; LF/400 W; HF/400 W @ 8Ω
Frequency response
55 Hz-18KHz (-10 dB); 40 Hz-180 Hz
Sensitivity (SPL)
LF 98 dB; HF 112 dB; 99 dB
Maximum SPL
LF 123 dB (continuous) / 136 dB (peak); 129 dB (continuous) / 136 dB (peak)
Dimensions
500 × 320 × 310 mm; 500 × 800 × 540 mm
All specifications

Description

The FYB LA-110 and LA-110B form a line array of passive two-way modules with a 10" driver and an active 18" subwoofer with a built-in three-channel class-D amplifier and DSP (digital signal processing). The modules connect to the Neutrik NL4 output of the subwoofer, with LF (low-frequency) and HF (high-frequency) on separate channels.

Compared with the LA-108P/LA-212P, the module is larger, with a 10" driver and two HF drivers, the amplifier HF channel is more powerful, and the subwoofer uses a single 18" driver. The module can go on a pole or be flown.

LA-110B active subwoofer

  • 18" driver (100 mm voice coil, 220 mm magnet), 800 W AES, 3200 W peak, 8 Ω.
  • 40–180 Hz response, 99 dB sensitivity, up to 129 dB continuous and 136 dB peak.
  • Class-D amplifier with 3 channels; 400 W LF and 400 W HF into 8 Ω for the modules.
  • DSP: delay, EQ, crossover, limiter, mixer, polarity, gain, mute; control over USB and RS-485.
  • XLR connectors, 220 V mains via powerCON NAC3MPA, fan cooling, DCP, OVP, UVP, OCP, OTP and short-circuit protection.
  • 500 × 800 × 540 mm, 50 kg.

LA-110 module

  • Neodymium 10" driver (75 mm voice coil, 170 mm magnet) and two 1.73" compression drivers with 44 mm voice coils.
  • LF 350 W and HF 100 W AES, 1400 W and 400 W peak; 8 Ω LF and 16 Ω HF.
  • 55 Hz – 18 kHz response, sensitivity 98 dB LF and 112 dB HF; LF SPL up to 123 dB continuous and 136 dB peak.
  • 500 × 320 × 310 mm, 20 kg; pole mount or 4-point rigging with 0° to 10° splay.

Module and subwoofer share the same 500 mm width. The number of modules and the DSP settings are worked out when audio and public address systems are designed.

Specifications

General
Device typepassive single 10-inch two-way line array speaker; Active single 18-inch linear sub-bass array speaker
Control methodsUSB and RS-485
Power
Power supply220 V ~50 Hz
Electrical protectionShort, DCP, OVP, UVP, OCP, OTP
Power connectorpowerCON NAC3MPA
Audio
Rated power outputRated power (AES): LF 350 W / HF 100 W; Rated power (AES): 800 W; Output power: USB/1300 W; LF/400 W; HF/400 W @ 8Ω
InputsXLR male and female
Input impedance20KΩ
OutputsNeutrik NL4 speaker stand LF 1+1- / HF 2+2-
Frequency response55 Hz-18KHz (-10 dB); 40 Hz-180 Hz
Sensitivity (SPL)LF 98 dB; HF 112 dB; 99 dB
Maximum SPLLF 123 dB (continuous) / 136 dB (peak); 129 dB (continuous) / 136 dB (peak)
Signal-to-noise ratio100 dB @20 Hz - 20 kHz A-weighted @8Ω
Total harmonic distortion≤1% @1 kHz, full power 8Ω
Speaker unitLF 1 × 10" NdFeB/Voice Coil∅75 mm/Magnetic Steel∅170 mm; 1 × 18" ferrite/voice coil∅100 mm/magnetic steel∅220 mm
ConnectorNeutrik NL4 speaker stand LF 1+1- / HF 2+2-
Coolingfan forced cooling
Peak powerLF1400 W / HF 400 W; 3200 W
Rated impedanceRated impedance: LF 8Ω; HF 16Ω; Rated impedance: 8Ω; Working impedance: 8Ω
Directivity120°x 10° vertically adjustable; no directivity
Input sensitivity1 V
Signal processingmute, polarity, gain, delay, limiter, mixer, EQ, XOver
Amplifier classClass D
GrilleHexagonal mesh + inner covered sound-transmitting mesh cotton; Hexagonal mesh + sound-transmitting mesh cotton
Channels3 channels
Physical and environment
Dimensions500 × 320 × 310 mm; 500 × 800 × 540 mm
Net weight20 kg; 50 kg
Material15 mm multi-layer birch plywood; 18 mm multi-layer birch plywood
Finishblack sand paint
Mountingsupport rod and 4-point hanging, adjustable from 0° to 10°; 4-point hanging

FAQ

What's the difference between professional speaker and consumer speaker?

Consumer speaker – designed for home use (stereo system, Home Theater), low power (20W-100W), plastic housing, no DSP processor, no Rigging hardware, low price. Professional speaker – designed for professional use (concerts, clubs, theaters), high power (200W-2000W), wood/metal housing (Touring Grade), DSP processor (EQ, Limiter, Crossover), Rigging hardware (suspension, stacking), high price. Differences: power (professional 10-20× more powerful), sound quality (professional cleaner, more detailed), reliability (professional more durable, 8-12 hours operation), functionality (professional DSP, Rigging). Recommendation: for concerts/clubs – professional speakers (mandatory), for home – consumer speakers.

What is Line Array system and why is it used at large concerts?

Line Array system is multiple professional speakers (4-20 units) vertically connected to each other and suspended above stage – configuration: each speaker is 2-Way/3-Way (Woofer + Tweeter + Horn), speakers connected with Rigging hardware (aluminum frame), suspended on stage cables (motorized hoist), angle adjusts per speaker (0°-10°). Advantages: even sound dispersion – sound evenly disperses to all listeners (front row and back row receive equal sound), long distance – sound reaches 50-100 meters (ideal for large stadiums), high SPL – 130-140dB sound level (very loud), minimal echo – vertical configuration reduces echo. Application: large concerts (5000-50000 people), festivals, stadiums, arenas. This is industry standard for large events.

How to choose professional speakers for specific facility?

Professional speaker selection depends on facility type and size – small club (50-200 people): 2× Main PA speaker 400W-800W (2-Way), 1-2× subwoofer 500W-1000W (18"), DSP processor, amplifier 1000W-2000W. Medium club/theater (200-500 people): 2× Main PA speaker 800W-1200W (3-Way), 2-4× subwoofer 1000W-1500W (18"), 2-4× Fill speaker (additional coverage), DSP processor, amplifier 3000W-5000W. Large concert (500-5000 people): Line Array system (8-16 speakers per side), 4-8× subwoofer 2000W-3000W (21"), 4-8× Fill/Delay speaker, DSP processor, amplifier 10000W-20000W. Tips: consider facility acoustics (reverberation, echo), use DSP processor (optimization), hire professional sound engineer (setup, calibration).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.