FYB LA-108P/LA-212P line array with active subwoofer
- Model
- LA-212P
- SKU
- FYB-270848
Compact line array: passive LA-108P modules with an 8" driver and an active LA-212P 2 × 12" subwoofer with built-in amplifier and DSP.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- 220 V ~50 Hz
- Rated power output
- Rated power (AES): LF 250 W / HF 50 W; Rated power (AES): 500 W; Output power: USB/900 W; LF/400 W; HF/200 W @ 8Ω
- Frequency response
- 55 Hz-18KHz (-10db); 35 Hz-200 Hz (-10 dB)
- Sensitivity (SPL)
- LF 98 dB; HF 112 dB; 102 dB
- Maximum SPL
- LF> 122 dB (continuous)/HF> 129 dB (peak); 129 dB (continuous)
- Dimensions
- 400 × 260 × 250 mm; W400×D660×H700 mm
Description
The FYB LA-108P and LA-212P form a compact line array with an active subwoofer. The LA-108P module is passive and two-way, with a single 8" driver; the LA-212P subwoofer, with two 12" drivers, has a built-in three-channel class-D amplifier and DSP. The modules connect to the Neutrik NL4 output of the subwoofer, so no separate amplifier is needed for the modules. Module and subwoofer share the same 400 mm width.
DSP means digital signal processing: delay, EQ, crossover, limiter and levels are set inside the subwoofer, with control over USB and RS-485.
LA-212P active subwoofer
- Two ferrite 12" drivers (75 mm voice coils, 190 mm magnets), 500 W AES, 2000 W peak.
- 35–200 Hz response, 102 dB sensitivity, up to 129 dB continuous.
- Class-D amplifier with 3 channels; 400 W LF (low-frequency) and 200 W HF (high-frequency) into 8 Ω for the modules.
- XLR male and female connectors, 20 kΩ input impedance, 1 V input sensitivity; 100 dB signal-to-noise ratio, distortion no more than 1 %.
- 220 V, 50 Hz mains via powerCON NAC3MPA, fan cooling; protection against short circuit, DC (DCP), over- and under-voltage (OVP, UVP), over-current (OCP) and overheating (OTP).
- 400 × 660 × 700 mm, 45 kg.
LA-108P module
- Neodymium 8" driver (51 mm voice coil) and 1.73" compression driver with a 44 mm voice coil.
- LF 250 W and HF 50 W AES, 1000 W and 200 W peak; 8 Ω per section.
- 55 Hz – 18 kHz response, sensitivity 98 dB LF and 112 dB HF.
- 400 × 260 × 250 mm, 10 kg, 3-point rigging with 0° to 10° splay.
The number of modules per subwoofer and the DSP settings are worked out when audio and public address systems are designed.
Specifications
| Device type | passive single 8-inch two-way line array speaker; Active dual 12-inch linear sub-bass array speakers |
|---|---|
| Control methods | USB and RS-485 |
| Power supply | 220 V ~50 Hz |
|---|---|
| Electrical protection | Short, DCP, OVP, UVP, OCP, OTP |
| Power connector | powerCON NAC3MPA |
| Rated power output | Rated power (AES): LF 250 W / HF 50 W; Rated power (AES): 500 W; Output power: USB/900 W; LF/400 W; HF/200 W @ 8Ω |
|---|---|
| Inputs | XLR male and female |
| Input impedance | 20KΩ |
| Outputs | Neutrik NL4 speaker stand LF 1+1- / HF 2+2- |
| Frequency response | 55 Hz-18KHz (-10db); 35 Hz-200 Hz (-10 dB) |
| Sensitivity (SPL) | LF 98 dB; HF 112 dB; 102 dB |
| Maximum SPL | LF> 122 dB (continuous)/HF> 129 dB (peak); 129 dB (continuous) |
| Signal-to-noise ratio | 100 dB @20 Hz - 20 kHz A-weighted @8Ω |
| Total harmonic distortion | ≤1% @1 kHz, full power 8Ω |
| Speaker unit | LF 1 × 8" NdFeB/Voice Coil∅51 mm/Magnetic Steel∅170 mm; 2 × 12" ferrite/voice coil∅75 mm/magnetic steel∅190 mm |
| Connector | Neutrik NL4 speaker stand LF 1+1- / HF 2+2- |
| Cooling | fan forced cooling |
| Peak power | LF1000 W / HF 200 W; 2000 W |
| Rated impedance | Rated impedance: LF 8Ω; HF 8Ω; Rated impedance: 4Ω; Working impedance: 8Ω |
| Directivity | 120°x 10° vertically adjustable; no directivity |
| Input sensitivity | 1 V |
| Signal processing | mute, polarity, gain, delay, limiter, mixer, EQ, XOver |
| Amplifier class | Class D |
| Grille | Hexagonal mesh + inner covered sound-transmitting mesh cotton; Hexagonal mesh + sound-transmitting mesh cotton |
| Channels | 3 channels |
| Dimensions | 400 × 260 × 250 mm; W400×D660×H700 mm |
|---|---|
| Net weight | 10 kg; 45 kg |
| Material | 15 mm multi-layer birch plywood; 18 mm multi-layer birch plywood |
| Finish | black sand paint |
| Mounting | 3-point hanging, adjustable from 0° to 10°; 3-point hanging |
FAQ
What's the difference between professional speaker and consumer speaker?
Consumer speaker – designed for home use (stereo system, Home Theater), low power (20W-100W), plastic housing, no DSP processor, no Rigging hardware, low price. Professional speaker – designed for professional use (concerts, clubs, theaters), high power (200W-2000W), wood/metal housing (Touring Grade), DSP processor (EQ, Limiter, Crossover), Rigging hardware (suspension, stacking), high price. Differences: power (professional 10-20× more powerful), sound quality (professional cleaner, more detailed), reliability (professional more durable, 8-12 hours operation), functionality (professional DSP, Rigging). Recommendation: for concerts/clubs – professional speakers (mandatory), for home – consumer speakers.
What is Line Array system and why is it used at large concerts?
Line Array system is multiple professional speakers (4-20 units) vertically connected to each other and suspended above stage – configuration: each speaker is 2-Way/3-Way (Woofer + Tweeter + Horn), speakers connected with Rigging hardware (aluminum frame), suspended on stage cables (motorized hoist), angle adjusts per speaker (0°-10°). Advantages: even sound dispersion – sound evenly disperses to all listeners (front row and back row receive equal sound), long distance – sound reaches 50-100 meters (ideal for large stadiums), high SPL – 130-140dB sound level (very loud), minimal echo – vertical configuration reduces echo. Application: large concerts (5000-50000 people), festivals, stadiums, arenas. This is industry standard for large events.
How to choose professional speakers for specific facility?
Professional speaker selection depends on facility type and size – small club (50-200 people): 2× Main PA speaker 400W-800W (2-Way), 1-2× subwoofer 500W-1000W (18"), DSP processor, amplifier 1000W-2000W. Medium club/theater (200-500 people): 2× Main PA speaker 800W-1200W (3-Way), 2-4× subwoofer 1000W-1500W (18"), 2-4× Fill speaker (additional coverage), DSP processor, amplifier 3000W-5000W. Large concert (500-5000 people): Line Array system (8-16 speakers per side), 4-8× subwoofer 2000W-3000W (21"), 4-8× Fill/Delay speaker, DSP processor, amplifier 10000W-20000W. Tips: consider facility acoustics (reverberation, echo), use DSP processor (optimization), hire professional sound engineer (setup, calibration).
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.