Skip to content
FYB

FYB FM-WS54T wireless microphone system with 4 lavalier mics

Model
FYB-436018

UHF conference set with a receiver and four lavalier microphones: the microphone clips to clothing and the presenter keeps both hands free.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Wireless frequency range
Frequency range: UHF 610 MHz ~ 670 MHz; Carrier frequency: UHF 610 MHz ~ 670 MHz
Power supply
DC: 12v ~ 17 V; DC 4.5 V (1.5 V AA*2)
Frequency response
40 Hz~20KHz
All specifications

Description

The FYB FM-WS54T is a wireless microphone system for conferences: a receiver and four tie-clip (lavalier) microphones. The microphone clips to clothing, leaving the presenter’s hands free for slides and notes.

  • Unidirectional condenser capsules, -43 dB sensitivity at 1 kHz.
  • UHF 610–670 MHz, FM, PLL frequency synthesis, 0.001 % stability.
  • Individual channel outputs (0–400 mV) and a mixed output (0–300 mV): channel by channel into a mixer, or one signal into an amplifier.
  • 40 Hz – 20 kHz response, dynamic range of 100 dB or more, interference rejection above 80 dB.
  • Receiver power 12–17 V DC; two AA batteries in each transmitter.

The four lavalier microphones are connected to the room’s mixer or amplifier during installation of audio and public address systems.

Specifications

General
Device typeCapacitance
Communication
Wireless frequency rangeFrequency range: UHF 610 MHz ~ 670 MHz; Carrier frequency: UHF 610 MHz ~ 670 MHz
Frequency stability0.001%
ModulationOscillation mode: PLL frequency synthesis; Modulation mode: FM; Maximum frequency deviation: ±30KH
Interference rejection> 80 dB
Power
Power supplyDC: 12v ~ 17 V; DC 4.5 V (1.5 V AA*2)
Current draw100 mA
Audio
Outputsindependent 0 – 400 mv mixed 0 – 300 mv
Frequency response40 Hz~20KHz
Signal-to-noise ratio> 60 dB
Total harmonic distortion< 0.5%@1KHz
Directivitysingle directivity
Dynamic range≥100 dB
Microphone sensitivitySensitivity: 1.2/UV @S/N=12 dB; Microphone sensitivity: -43 3 dB @ 1 kHz

FAQ

What is the difference between UHF and VHF wireless microphones?

UHF (Ultra High Frequency) systems – 470-960MHz frequency range, professional grade, 30-100m range (line of sight), many channels (20-32+ simultaneously with frequency coordination), diversity reception (2 antennas, dropout avoidance), better RF stability (less interference from TV/radio), rechargeable Li-ion batteries (8-12h), ideal for professional events (live concerts, theaters, corporate events), more expensive ($200-1000+ per channel). VHF (Very High Frequency) systems – 174-216MHz frequency range, budget solution, 20-50m range, limited channels (4-8 max), no diversity reception (1 antenna, dropout risk), more RF interference (TV/radio), AA batteries (4-6h), ideal for small events (weddings, small presentations, budget), economical ($50-200 per channel). Recommendation: UHF – professional events, multi-channel, reliability critical. VHF – small events, 1-4 microphones, budget.

How many wireless microphones can I use simultaneously?

The number of wireless microphones depends on system type and frequency coordination. General rule: 1) VHF systems – 4-8 channels max (limited frequency range 174-216MHz, 42MHz bandwidth), not recommended >4 channels (interference risk). 2) UHF systems – 20-32+ channels (wide frequency range 470-960MHz, 490MHz bandwidth), require frequency coordination (software or manual calculation), each channel requires 200-300kHz spacing. 3) Digital 2.4GHz systems – 2-4 channels max (limited bandwidth, automatic frequency hopping), not recommended multi-channel. 4) Frequency coordination – process of selecting frequencies that don't interfere with each other, UHF systems have RF scan function (automatically finds free frequencies), professional systems have frequency coordination software. Recommendation: 1-4 microphones → VHF or UHF. 5-16 microphones → UHF + frequency coordination. 17-32+ microphones → UHF multi-channel rack + professional frequency coordination software.

How to install and configure a wireless microphone system?

Installing a wireless microphone system requires precise configuration. Steps: 1) Receiver setup – mount receiver in rack or on table, connect antennas (on diversity systems 2 antennas), connect audio output (XLR) to mixer input, turn on power. 2) RF Scan – use receiver RF scan function to find free frequencies (automatically scans 470-960MHz and finds clean frequencies), select frequency without interference. 3) Transmitter sync – use IR sync (infrared) or manual frequency setting on transmitter to set same frequency as receiver, ensure frequency match (on LCD display). 4) Audio gain – adjust transmitter gain (input sensitivity) and receiver gain (output level), turn on microphone and speak, adjust gain so audio meter is from -20dB to -6dB (not red zone). 5) Squelch – adjust squelch (noise gate) on receiver, increase squelch until background noise disappears but not too high (dropouts). 6) Diversity check – verify diversity reception works (2 antenna LEDs should light), walk on stage and ensure no dropouts. 7) Battery check – ensure batteries fully charged (8-12h), always have spare batteries.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.