Skip to content
FYB

FYB FM-WU12 frequency-agile wireless microphone system

Model
FYB-435968

Frequency-agile UHF wireless microphone system covering 500–980 MHz, with selectable transmitter power and a range of up to 300 m.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Wireless frequency range
Working frequency: 500-980 MHz; Frequency bandwidth: 50 MHz
Frequency response
40 Hz-18KHz
All specifications

Description

The FYB FM-WU12 is a frequency-agile UHF wireless microphone system for halls and outdoor sites. Range and battery life depend on the transmitter power setting:

  • high power – up to 300 m in the open, about 2 h on a battery;
  • reduced power – 150–200 m, 4–5 h.

Radio

  • 200 channels at 250 kHz spacing across 500–980 MHz, 50 MHz bandwidth, ±0.005 % frequency stability.
  • True diversity reception: two receiving paths with separate antennas, and the stronger signal goes to the output, so fewer dropouts.
  • The transmitter frequency is set from the receiver over IR.
  • Dual squelch: noise level and pilot tone.

40 Hz – 18 kHz response, signal-to-noise ratio above 105 dB, distortion under 0.5 %. Transmitter battery level shows on the receiver display; power from two AA or AAA batteries. Radio channels are chosen for the site during installation of audio and public address systems.

Specifications

Communication
Wireless frequency rangeWorking frequency: 500-980 MHz; Frequency bandwidth: 50 MHz
Frequency stability±0.005%
Power
Battery2 AA batteries/AAA batteries
Audio
Frequency response40 Hz-18KHz
Signal-to-noise ratio>105 dB
Total harmonic distortion<0.5%
ChannelsChannel: 200 channels; Channel spacing: 250KHz

FAQ

What is the difference between UHF and VHF wireless microphones?

UHF (Ultra High Frequency) systems – 470-960MHz frequency range, professional grade, 30-100m range (line of sight), many channels (20-32+ simultaneously with frequency coordination), diversity reception (2 antennas, dropout avoidance), better RF stability (less interference from TV/radio), rechargeable Li-ion batteries (8-12h), ideal for professional events (live concerts, theaters, corporate events), more expensive ($200-1000+ per channel). VHF (Very High Frequency) systems – 174-216MHz frequency range, budget solution, 20-50m range, limited channels (4-8 max), no diversity reception (1 antenna, dropout risk), more RF interference (TV/radio), AA batteries (4-6h), ideal for small events (weddings, small presentations, budget), economical ($50-200 per channel). Recommendation: UHF – professional events, multi-channel, reliability critical. VHF – small events, 1-4 microphones, budget.

How many wireless microphones can I use simultaneously?

The number of wireless microphones depends on system type and frequency coordination. General rule: 1) VHF systems – 4-8 channels max (limited frequency range 174-216MHz, 42MHz bandwidth), not recommended >4 channels (interference risk). 2) UHF systems – 20-32+ channels (wide frequency range 470-960MHz, 490MHz bandwidth), require frequency coordination (software or manual calculation), each channel requires 200-300kHz spacing. 3) Digital 2.4GHz systems – 2-4 channels max (limited bandwidth, automatic frequency hopping), not recommended multi-channel. 4) Frequency coordination – process of selecting frequencies that don't interfere with each other, UHF systems have RF scan function (automatically finds free frequencies), professional systems have frequency coordination software. Recommendation: 1-4 microphones → VHF or UHF. 5-16 microphones → UHF + frequency coordination. 17-32+ microphones → UHF multi-channel rack + professional frequency coordination software.

How to install and configure a wireless microphone system?

Installing a wireless microphone system requires precise configuration. Steps: 1) Receiver setup – mount receiver in rack or on table, connect antennas (on diversity systems 2 antennas), connect audio output (XLR) to mixer input, turn on power. 2) RF Scan – use receiver RF scan function to find free frequencies (automatically scans 470-960MHz and finds clean frequencies), select frequency without interference. 3) Transmitter sync – use IR sync (infrared) or manual frequency setting on transmitter to set same frequency as receiver, ensure frequency match (on LCD display). 4) Audio gain – adjust transmitter gain (input sensitivity) and receiver gain (output level), turn on microphone and speak, adjust gain so audio meter is from -20dB to -6dB (not red zone). 5) Squelch – adjust squelch (noise gate) on receiver, increase squelch until background noise disappears but not too high (dropouts). 6) Diversity check – verify diversity reception works (2 antenna LEDs should light), walk on stage and ensure no dropouts. 7) Battery check – ensure batteries fully charged (8-12h), always have spare batteries.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.