Skip to content
FYB

FYB FY-8000C programmable PA timer

Model
FY-8000C
SKU
FYB-524287

Scheduled broadcast unit for campuses, factories and parks: MP3 player, FM tuner, and control of zones and amplifier power.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Frequency response
20 Hz-20KHz±3 dB
Dimensions
485 × 395 × 95 mm
Zones
8 partition outputs, with a total maximum capacity of 3200 W
All specifications

Description

The FYB FY-8000C is a programmable PA timer: on schedule, music, radio or stored recordings are played in the chosen zones, and the amplifiers are powered up at the same time. Typical sites are campuses, factories, parks, squares and residential areas.

Scheduling

  • 4 general schedules on a weekly cycle and 6 special ones for set dates, each with up to 256 events.
  • Programmes are edited on a computer, and the unit can be controlled online from there.
  • 4.3" colour TFT screen, menus in English or Chinese.

Sources and switching

  • MP3 player with 2 GB of built-in memory and an SD card; MP3, WMA, AAC, WAV, APE and FLAC.
  • 88–108 MHz FM tuner; recording from a microphone, the line input and the radio.
  • AUX input, zone outputs, 6 switched 220 V power outlets (up to 1600 W) and a power expansion output.
  • Fire alarm input (contact closure) for emergency mode.

500 mV line output, 20 Hz – 20 kHz ±3 dB, signal-to-noise ratio of 85 dB or more. 485 × 395 × 95 mm, 5 kg. Schedules and zones are set up during commissioning of audio and public address systems.

Specifications

Access control
Power output-220 V/50 Hz (MAX1600 W)
Hardware
MemoryBuilt-in 2G memory or external SD card
Audio
OutputsLINE 500mV Unbalanced
Frequency response20 Hz-20KHz±3 dB
Signal-to-noise ratio≥85 dB
Total harmonic distortion<0.1%(1KHz)
Radio tunerFM 88-108 MHz
Audio formatsMP3, WMA, AAC, WAV, APE, FLAC
Input sensitivityMIC 5mV LINE 500mV
Zones8 partition outputs, with a total maximum capacity of 3200 W
Physical and environment
Dimensions485 × 395 × 95 mm
Net weight5Kg
Gross weight6Kg

FAQ

What is 100V constant voltage system and why is it needed?

100V constant voltage system is special audio technology using high voltage (100V) and low current for signal transmission. This allows: 1) connect dozens of speakers to one amplifier (50-100+ speakers), 2) use thin cables (0.75mm²-1.5mm²) over long distances (300-1000m), 3) minimal signal loss, 4) individual power adjustment of each speaker via transformer. Ideal for large facilities.

How many speakers can be connected to one amplifier?

Depends on amplifier power and speaker power. Formula: quantity = amplifier power ÷ speaker power. Example: 240W amplifier + 6W speakers = 40 speakers (240÷6=40). 500W amplifier + 10W speakers = 50 speakers. Always leave 20% reserve and consider zone distribution.

Can PA system integrate with fire alarm?

Yes, PA system must integrate with fire alarm for voice evacuation (EN54-16 standard). When fire panel activates, PA system automatically: 1) stops background music, 2) plays pre-recorded evacuation message in all zones, 3) turns all speakers to maximum volume, 4) continues message until fire panel is reset. This is life-safety critical function.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.