Skip to content
FYB

FYB FY-8016E 16-zone selector

Model
FY-8016E
SKU
FYB-550490

Zone selector for a PA system: 16 zones in four groups, with automatic changeover to emergency broadcast on a fire alarm signal.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
AC220 V 50 Hz
Rated power output
20 W
Dimensions
484 × 350 × 88 mm
Zones
4 groups of partition output, each with 4 channels
All specifications

Description

The FYB FY-8016E is a zone selector for a PA system: amplifier outputs are switched to 16 loudspeaker zones. The zones are split into 4 groups, each with two amplifier inputs (background music and emergency) and 4 zones. Music and the fire signal are switched independently.

  • Changeover to fire mode on a contact closure or a 24 V DC signal.
  • Control by buttons, by programme, or from the central unit over the bus.
  • Several units can be cascaded for up to 128 zones.

220 V mains, 20 W consumption. 484 × 350 × 88 mm, 7.36 kg. How the building is split into zones is decided when audio and public address systems are designed.

Specifications

General
Control methodsShort circuit trigger/DC24 V trigger/button control/online communication
Power
Power supplyAC220 V 50 Hz
Power consumption20 W
Audio
Rated power output20 W
Inputs4 groups of background broadcast and emergency broadcast
Zones4 groups of partition output, each with 4 channels
Physical and environment
Dimensions484 × 350 × 88 mm
Net weight7.36 kg

FAQ

What is 100V constant voltage system and why is it needed?

100V constant voltage system is special audio technology using high voltage (100V) and low current for signal transmission. This allows: 1) connect dozens of speakers to one amplifier (50-100+ speakers), 2) use thin cables (0.75mm²-1.5mm²) over long distances (300-1000m), 3) minimal signal loss, 4) individual power adjustment of each speaker via transformer. Ideal for large facilities.

How many speakers can be connected to one amplifier?

Depends on amplifier power and speaker power. Formula: quantity = amplifier power ÷ speaker power. Example: 240W amplifier + 6W speakers = 40 speakers (240÷6=40). 500W amplifier + 10W speakers = 50 speakers. Always leave 20% reserve and consider zone distribution.

Can PA system integrate with fire alarm?

Yes, PA system must integrate with fire alarm for voice evacuation (EN54-16 standard). When fire panel activates, PA system automatically: 1) stops background music, 2) plays pre-recorded evacuation message in all zones, 3) turns all speakers to maximum volume, 4) continues message until fire panel is reset. This is life-safety critical function.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.