Skip to content
FYB

FYB FY-12T digital tuner

Model
FY-12T
SKU
FYB-172122

Digital tuner for a PA system: FM (RDS), AM and DAB+ radio, music from USB and over Bluetooth, XLR and RCA outputs.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Rated impedance
Over 10 kΩ/kohms; Over 600Ω/ohms
All specifications

Description

The FYB FY-12T is a digital tuner, a radio and music source for PA and background sound systems. DAB+ is digital broadcast radio, alongside FM and AM.

  • Radio: FM (RDS) 87.50–108.00 MHz, DAB+ (DAB) 168.00–240.00 MHz, AM 522–1620 kHz.
  • MP3, WAV, WMA, FLAC and APE files from USB; Bluetooth 5.0 and an Aux input.
  • Left and right outputs on balanced XLR and unbalanced RCA; 2 Vrms into 10 kΩ.
  • 20 Hz – 20 kHz ±0.5 dB, signal-to-noise ratio above 105 dB, distortion under 0.005 %.

100–240 V mains, 30 W consumption, 0.5 W on standby. 372 × 267 × 49 mm, 2.80 kg. The tuner is connected to an amplifier or matrix during installation of audio and public address systems.

Specifications

Audio
Radio tunerFrequency range FM(RDS): 87.50 - 108.00 MHz; DAB+(DAB): 168.00 - 240.00 MHz; AM: 522 - 1620 Khz
Rated impedanceOver 10 kΩ/kohms; Over 600Ω/ohms
Audio formatsMP3, WAV, WMA, FLAC, APE
Output level2 Vrms (Max. 10 dBu) at 10 kΩ/kohms load; 8.23 dBu (Max. 24 dBu) at 600Ω/ohms load

FAQ

What is 100V constant voltage system and why is it needed?

100V constant voltage system is special audio technology using high voltage (100V) and low current for signal transmission. This allows: 1) connect dozens of speakers to one amplifier (50-100+ speakers), 2) use thin cables (0.75mm²-1.5mm²) over long distances (300-1000m), 3) minimal signal loss, 4) individual power adjustment of each speaker via transformer. Ideal for large facilities.

How many speakers can be connected to one amplifier?

Depends on amplifier power and speaker power. Formula: quantity = amplifier power ÷ speaker power. Example: 240W amplifier + 6W speakers = 40 speakers (240÷6=40). 500W amplifier + 10W speakers = 50 speakers. Always leave 20% reserve and consider zone distribution.

Can PA system integrate with fire alarm?

Yes, PA system must integrate with fire alarm for voice evacuation (EN54-16 standard). When fire panel activates, PA system automatically: 1) stops background music, 2) plays pre-recorded evacuation message in all zones, 3) turns all speakers to maximum volume, 4) continues message until fire panel is reset. This is life-safety critical function.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.