FYB FYC-730CF frameless coaxial ceiling speaker, 30 W
- Model
- FYC-730CF
- SKU
- FYB-172141
Frameless 6.5"+1" coaxial ceiling speaker for a 100 V or 70 V line or 8 Ω direct connection; up to 30 W, mode set by a rotary switch.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Frequency response
- 70-20KHz
- Sensitivity (SPL)
- 90 dB
- Dimensions
- Φ235 × 101 mm
Description
The FYB FYC-730CF is a frameless coaxial ceiling speaker with a magnetically attached grille. Connection is to a 100 V or 70 V line, or straight to an amplifier in 8 Ω mode.
In 8 Ω mode the transformer is bypassed, and connection is to an ordinary amplifier, as with any passive loudspeaker.
- Rotary switch for mode and power: 100 V line – 3.75, 7.5, 15 or 30 W; 70 V line – 1.88, 3.75, 7.5, 15 or 30 W; 8 Ω – 30 W.
- Two-way coaxial design with a crossover: 6.5" woven-cone woofer and 1" silk-dome tweeter. The crossover splits the signal by frequency between the two drivers.
- 70 Hz – 20 kHz, 90 dB sensitivity.
- ABS housing, metal grille and clamps, white; 235 mm across, 101 mm deep, 205 mm ceiling cut-out.
Mode and power for each point follow the audio and public address design.
Specifications
| Power taps | 70 V: 2=1.88 W, 3=3.75 W, 4=7.5 W, 5=15 W, 6=30 W; 100 V: 2=3.75 W, 3=7.5 W, 4=15 W, 5=30 W, 6=N.C.; 8Ω: 1=30 W |
|---|---|
| Frequency response | 70-20KHz |
| Sensitivity (SPL) | 90 dB |
| Speaker unit | Woofer driver: woven cone 6.5"*1; Tweeter driver: silk dome 1"*1 |
| Line voltage | 70 V/100 V/8Ω |
| Dimensions | Φ235 × 101 mm |
|---|---|
| Cutout size | Φ205 mm |
| Material | ABS enclosure, metal grille and clamps |
| Finish | White |
FAQ
What's the difference between 100V and 8Ω ceiling speakers?
100V (constant voltage) speakers – used in commercial PA systems, one amplifier can power 20-100+ speakers over long distances (500m+ cable), each speaker has a transformer and power selection (3W/6W/10W tap selector), ideal for large facilities (shopping malls, hotels, offices), simple installation (parallel connection), lower cable cost. 8Ω (low impedance) speakers – used in Hi-Fi systems, amplifier can power 2-8 speakers over short distances (<30m cable), better sound quality, ideal for residential homes, home theaters, studios, more expensive cable (larger gauge). Recommendation: 100V – commercial facilities, background music, PA systems. 8Ω – residential homes, Hi-Fi systems, critical listening.
How many ceiling speakers do I need for my facility?
The number of ceiling speakers depends on area, ceiling height, and usage purpose. General rule: 1) background music (stores, offices) – one 10W speaker per 20-25m², ceiling height 2.5-3.5m, example: 100m² store = 4-5 speakers. 2) restaurants, cafes – one 15W speaker per 15-20m² (higher sound level), example: 80m² restaurant = 4-5 speakers. 3) large spaces (shopping malls) – one 30W speaker per 30-40m², ceiling height 4-6m, example: 500m² shopping mall = 12-15 speakers. 4) high ceiling (>4m) – use more powerful speakers (20W-30W) or add more speakers. 5) voice announcements (EN 54-24) – one speaker per 10-15m² (higher coverage). Recommendation: better to have more speakers at lower power than fewer speakers at higher power (more even coverage).
How do I install ceiling speakers?
Installing ceiling speakers is simple but requires precision. Steps: 1) planning – determine speaker positions (even distribution, avoid too close to walls <50cm), mark positions on ceiling. 2) cutting hole – use hole saw (typically 165mm-210mm diameter depending on speaker size), cut hole in ceiling (gypsum board, suspended ceiling). 3) cable routing – run speaker cable (2-core, 1.5mm² or 2.5mm²) from amplifier to each speaker, leave 30-50cm extra cable. 4) connection – connect cable to speaker terminals (+ and -), on 100V speakers select power (tap selector: 3W/6W/10W). 5) installation – insert speaker into hole, press mounting clips (spring-loaded), speaker automatically locks in place. 6) grille mounting – install white grille (magnetic or screw-on). 7) testing – turn on system and verify all speakers work.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.