Skip to content
FYB

FYB FYW-103 wall-mount speaker, 3 W, IP44

Model
FYW-103
SKU
FYB-88364

Small IP44 wall-mount speaker for background music in spas, shower rooms, washrooms and clean rooms.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
120(W)×120(D)×60(H)mm
Frequency response
400-10KHz
Rated power output
3W
Sensitivity (SPL)
89dB
All specifications

Description

The FYB FYW-103 is a wall-mount speaker in a fully sealed housing for background music in spas, shower rooms, washrooms and clean rooms. Size: 120 × 120 × 60 mm.

  • IP44: protected against splashing water from any direction. The 3" polypropylene (PP) driver is waterproof as well.
  • Transformer: 3 W on a 100 V line, also suitable for a 70 V line.
  • 400 Hz – 10 kHz response, 89 dB sensitivity.
  • White ABS housing and grille, fixed on a screw through the hanging hole.

Speakers for wet areas join the building’s main PA line; how many and where is worked out when audio and public address systems are designed.

Specifications

Audio
Frequency response400-10KHz
Rated power output3W
Sensitivity (SPL)89dB
Line input100V or 70V
Speaker unit3” full range waterproof PP driver unit
Physical and environment
Dimensions120(W)×120(D)×60(H)mm
MaterialABS enclosure and ABS grille in white
MountingQuick installation by screw hanging hole
Ingress protection (IP)Waterproof IP44

FAQ

What's the difference between wall mount and ceiling speakers?

Wall mount speakers – mount on wall, larger drivers (5"-8"), better bass and dynamics, directional sound coverage (90°-120° angle), visible design (white/black housing), ideal for restaurants, cafes, sports halls, outdoor spaces (IP65 models), higher sound level. Ceiling speakers – install in ceiling, invisible design (only grille visible), even 360° coverage, smaller drivers (4"-6"), ideal for stores, offices, hotels where aesthetics matter. Recommendation: wall mount speakers – when you need better sound quality, directional coverage, outdoor installation. Ceiling speakers – when you need invisible design, even coverage, background music.

How many wall mount speakers do I need for my restaurant?

The number of wall mount speakers depends on area, ceiling height, and usage purpose. General rule: 1) restaurants, cafes (indoor) – one 20W speaker per 25-35m², ceiling height 2.5-3.5m, example: 100m² restaurant = 3-4 speakers. 2) outdoor terraces – one 30W speaker per 20-30m² (higher power due to outdoor noise), example: 80m² terrace = 3-4 speakers (IP65 models). 3) sports halls – one 40W-60W speaker per 40-50m², high ceiling 4-6m, example: 300m² hall = 6-8 speakers. 4) stores, schools – one 15W-20W speaker per 30-40m². 5) speaker placement – position on walls evenly (not in one corner), at 2-2.5m height, aim toward listening zone. Recommendation: better to have more speakers at lower power than fewer speakers at higher power (more even coverage, less noise).

How do I install wall mount speakers?

Installing wall mount speakers is simple. Steps: 1) planning – determine speaker positions (even distribution on walls, 2-2.5m height, aim toward listening zone), mark positions on wall. 2) mounting bracket installation – each speaker has a mounting bracket (L-shaped or U-shaped), install bracket on wall with 2 screws (dowel + screw, gypsum board or concrete wall). 3) cable routing – run speaker cable (2-core, 1.5mm² or 2.5mm²) from amplifier to each speaker (inside wall or in cable duct), leave 30-50cm extra cable. 4) connection – connect cable to speaker terminals (+ and -), on 100V speakers select power (tap selector: 10W/20W/30W). 5) speaker mounting – hang speaker on mounting bracket (hook or screw), secure with safety screw. 6) testing – turn on system and verify all speakers work, adjust angle if needed.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.