Heiman HM-720ES standalone carbon monoxide detector
- Model
- 9680
Standalone carbon monoxide detector with an electrochemical sensor, a siren of at least 85 dB and two AA batteries rated for 5 years.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Sensor type
- Electrochemical
- Alarm threshold
- 30 ppm without alarm before 120 min; 50 ppm without alarm before 60 min, with alarm before 90 min; 100 ppm without alarm before 10 min, with alarm before 40 min; 300 ppm with alarm before 3 min
- Power supply
- Power supply: DC3 V (2 × AA Batteries); Power supply mode: 5 years Battery
- Interconnection
- Standalone
- Sound level
- ≥85 dB (at 3 m)
- Dimensions
- 85 × 85 × 27.5 mm
Description
The Heiman HM-720ES is a standalone carbon monoxide detector: sensor, siren and warning light in one housing, with no control panel or wiring. Carbon monoxide (CO) has no colour or smell, so a leak from a boiler, stove or fireplace can only be noticed with a detector.
- Electrochemical carbon monoxide sensor.
- Alarm thresholds: 300 ppm within 3 min, 100 ppm between 10 and 40 min, 50 ppm between 60 and 90 min; 30 ppm for up to 120 min gives no alarm.
- Siren of at least 85 dB at 3 m, plus a warning light.
- Two AA batteries (3 V), rated for 5 years.
- 85 × 85 × 27.5 mm housing.
- Meets EN50291-1:2018, SGS certified.
The detector belongs in a home with a gas boiler, water heater, stove or fireplace. For alarms that must reach a monitoring centre, a fire alarm system is needed, designed and fitted under fire alarm installation.
Specifications
| Certifications | EN50291-1:2018, SGS |
|---|---|
| Sensor type | Electrochemical |
| Alarm threshold | 30 ppm without alarm before 120 min; 50 ppm without alarm before 60 min, with alarm before 90 min; 100 ppm without alarm before 10 min, with alarm before 40 min; 300 ppm with alarm before 3 min |
| Alarm output | Audio and flash alarm |
|---|
| Interconnection | Standalone |
|---|
| Sound level | ≥85 dB (at 3 m) |
|---|
| Power supply | Power supply: DC3 V (2 × AA Batteries); Power supply mode: 5 years Battery |
|---|
| Dimensions | 85 × 85 × 27.5 mm |
|---|
FAQ
What is carbon monoxide (CO) and why is it dangerous?
Carbon Monoxide (CO) is invisible, odorless, and tasteless gas produced by incomplete combustion of carbon-containing fuel (gas, oil, wood, coal). CO is deadly because: 1) invisible and odorless – impossible to detect with human senses. 2) blocks oxygen – CO binds to hemoglobin in blood and blocks oxygen transport in body. 3) fast action – at high concentration (400+ ppm) causes loss of consciousness and death in 1-3 hours. Symptoms: headache, nausea, dizziness, weakness, confusion. CO is called "silent killer" because victim often doesn't realize danger until too late.
Where should I install carbon monoxide detectors?
Correct carbon monoxide detector placement is critical for effective protection. Recommendations: 1) near all bedrooms – detector must be in corridor near all bedrooms (CO poisoning most dangerous during sleep). 2) on all floors – minimum one detector per floor. 3) near gas appliances – detector 1-3m distance from gas stove, water heater, boiler. 4) height – on wall at 1.5-2m height or on ceiling (CO is slightly lighter than air and spreads slowly). 5) avoid – in kitchen directly above stove (false alarms), in bathroom (humidity), near windows/doors (air flow). 6) in garage – if garage connected to house, must install detector.
What should I do if carbon monoxide detector triggers?
If carbon monoxide detector sounds, take following measures immediately: 1) don't ignore – CO detectors rarely give false alarms, take seriously. 2) evacuation – immediately evacuate all people and pets from building to open air. 3) open windows/doors – if safe to do so, open windows and doors for ventilation. 4) don't go back – don't enter building until professional checks. 5) call 112 – call emergency service from open air. 6) medical help – if anyone has symptoms (headache, nausea, dizziness), seek medical attention immediately. 7) check source – gas technician must check all gas appliances and find CO source.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.