Skip to content
Heiman

Heiman HM-722ESY standalone carbon monoxide detector

Model
9675

Standalone carbon monoxide detector certified by Intertek and SGS: electrochemical sensor, audible and visual alarm, AA batteries rated for 5 years.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sensor type
Electrochemical
Power supply
Power supply: DC3 V (2 × AA batteries); Power supply mode: 5 years Battery
Interconnection
Standalone
Sound level
≥85 dB (at 3 m)
Dimensions
130 × 72 × 43 mm
Operating temperature
0 °C – +40 °C
All specifications

Description

The Heiman HM-722ESY is a standalone carbon monoxide detector: electrochemical sensor, siren and visual indicator in one housing. Battery power means no cable run, so the detector goes straight onto a wall or ceiling.

  • Meets EN50291-1:2018, the European standard for domestic carbon monoxide alarms; Intertek and SGS certified.
  • Siren of at least 85 dB at 3 m, plus visual indication.
  • Two AA batteries (3 V), rated for 5 years.
  • 130 × 72 × 43 mm housing.
  • Operating temperature 0 to 40 °C.

Carbon monoxide comes from incomplete burning of fuel in a boiler, water heater, stove or fireplace, and has no colour or smell. LAGI picks the detector positions in a home as part of fire alarm installation.

Specifications

General
CertificationsEN50291-1:2018, Intertek, SGS
Sensor typeElectrochemical
Access control
Alarm outputVisual and audible indication
Communication
InterconnectionStandalone
Hardware
Sound level≥85 dB (at 3 m)
Power
Power supplyPower supply: DC3 V (2 × AA batteries); Power supply mode: 5 years Battery
Physical and environment
Dimensions130 × 72 × 43 mm
MountingWall mounting or ceiling mounting
Operating temperature0 °C – +40 °C

FAQ

What is carbon monoxide (CO) and why is it dangerous?

Carbon Monoxide (CO) is invisible, odorless, and tasteless gas produced by incomplete combustion of carbon-containing fuel (gas, oil, wood, coal). CO is deadly because: 1) invisible and odorless – impossible to detect with human senses. 2) blocks oxygen – CO binds to hemoglobin in blood and blocks oxygen transport in body. 3) fast action – at high concentration (400+ ppm) causes loss of consciousness and death in 1-3 hours. Symptoms: headache, nausea, dizziness, weakness, confusion. CO is called "silent killer" because victim often doesn't realize danger until too late.

Where should I install carbon monoxide detectors?

Correct carbon monoxide detector placement is critical for effective protection. Recommendations: 1) near all bedrooms – detector must be in corridor near all bedrooms (CO poisoning most dangerous during sleep). 2) on all floors – minimum one detector per floor. 3) near gas appliances – detector 1-3m distance from gas stove, water heater, boiler. 4) height – on wall at 1.5-2m height or on ceiling (CO is slightly lighter than air and spreads slowly). 5) avoid – in kitchen directly above stove (false alarms), in bathroom (humidity), near windows/doors (air flow). 6) in garage – if garage connected to house, must install detector.

What should I do if carbon monoxide detector triggers?

If carbon monoxide detector sounds, take following measures immediately: 1) don't ignore – CO detectors rarely give false alarms, take seriously. 2) evacuation – immediately evacuate all people and pets from building to open air. 3) open windows/doors – if safe to do so, open windows and doors for ventilation. 4) don't go back – don't enter building until professional checks. 5) call 112 – call emergency service from open air. 6) medical help – if anyone has symptoms (headache, nausea, dizziness), seek medical attention immediately. 7) check source – gas technician must check all gas appliances and find CO source.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.