Heiman HM-723ES standalone carbon monoxide detector
- Model
- 9676
Standalone carbon monoxide detector in a round 122 mm housing: siren of at least 85 dB, flashing light, AA batteries rated for 5 years.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Sensor type
- Electrochemical
- Power supply
- Power supply: DC3 V (2 × AA batteries); Power supply mode: 5 years Battery
- Interconnection
- Standalone
- Sound level
- ≥85 dB (at 3 m)
- Dimensions
- Φ122 × 38.8 mm
- Operating temperature
- 0 °C – +40 °C
Description
The Heiman HM-723ES is a standalone carbon monoxide detector in a round housing, 122 mm across and 38.8 mm high. Sensor, siren and warning light are built in, with wall or ceiling mounting.
- Electrochemical carbon monoxide (CO) sensor.
- Siren of at least 85 dB at 3 m, with a flashing light during an alarm.
- Two AA batteries (3 V), rated for 5 years; no cable to the detector.
- Operating temperature 0 to 40 °C.
- Meets EN50291-1:2018, Intertek certified.
Carbon monoxide has no colour or smell, so a leak from a boiler, water heater or stove can only be picked up by a detector. How many detectors are needed and where they go is settled during fire alarm installation.
Specifications
| Certifications | EN50291-1:2018, Intertek |
|---|---|
| Sensor type | Electrochemical |
| Alarm output | Audio and Flash alarm |
|---|
| Interconnection | Standalone |
|---|
| Sound level | ≥85 dB (at 3 m) |
|---|
| Power supply | Power supply: DC3 V (2 × AA batteries); Power supply mode: 5 years Battery |
|---|
| Dimensions | Φ122 × 38.8 mm |
|---|---|
| Mounting | Wall mounting or ceiling mounting |
| Operating temperature | 0 °C – +40 °C |
FAQ
What is carbon monoxide (CO) and why is it dangerous?
Carbon Monoxide (CO) is invisible, odorless, and tasteless gas produced by incomplete combustion of carbon-containing fuel (gas, oil, wood, coal). CO is deadly because: 1) invisible and odorless – impossible to detect with human senses. 2) blocks oxygen – CO binds to hemoglobin in blood and blocks oxygen transport in body. 3) fast action – at high concentration (400+ ppm) causes loss of consciousness and death in 1-3 hours. Symptoms: headache, nausea, dizziness, weakness, confusion. CO is called "silent killer" because victim often doesn't realize danger until too late.
Where should I install carbon monoxide detectors?
Correct carbon monoxide detector placement is critical for effective protection. Recommendations: 1) near all bedrooms – detector must be in corridor near all bedrooms (CO poisoning most dangerous during sleep). 2) on all floors – minimum one detector per floor. 3) near gas appliances – detector 1-3m distance from gas stove, water heater, boiler. 4) height – on wall at 1.5-2m height or on ceiling (CO is slightly lighter than air and spreads slowly). 5) avoid – in kitchen directly above stove (false alarms), in bathroom (humidity), near windows/doors (air flow). 6) in garage – if garage connected to house, must install detector.
What should I do if carbon monoxide detector triggers?
If carbon monoxide detector sounds, take following measures immediately: 1) don't ignore – CO detectors rarely give false alarms, take seriously. 2) evacuation – immediately evacuate all people and pets from building to open air. 3) open windows/doors – if safe to do so, open windows and doors for ventilation. 4) don't go back – don't enter building until professional checks. 5) call 112 – call emergency service from open air. 6) medical help – if anyone has symptoms (headache, nausea, dizziness), seek medical attention immediately. 7) check source – gas technician must check all gas appliances and find CO source.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.