Skip to content
Heiman

Heiman HM-733 standalone carbon monoxide detector

Model
9673

Standalone carbon monoxide detector with a 10-year sensor, RF868 radio and a CR123A lithium battery: replaceable for 5 years or built-in for 10.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sensor type
Electrochemical
Sensor life
10 years
Alarm threshold
30 ppm without alarm before 120 min; 50 ppm without alarm before 60 min, with alarm before 90 min; 100 ppm without alarm before 10 min, with alarm before 40 min; 300 ppm with alarm before 3 min
Power supply
Operating voltage: DC3 V (1 × CR123 A/CR17335 battery); Power supply mode: 5 years Battery (Replaceable); 10 years Battery Built-in
Wireless protocol
RF868
Interconnection
Standalone
All specifications

Description

The Heiman HM-733 is a standalone carbon monoxide detector with an electrochemical sensor and siren in one housing. The sensor is rated for 10 years; warm-up after power-on takes about 100 s.

  • Alarm thresholds: 300 ppm within 3 min, 100 ppm between 10 and 40 min, 50 ppm between 60 and 90 min; 30 ppm for up to 120 min gives no alarm.
  • Siren of at least 85 dB at 3 m, plus a flashing light.
  • RF868 radio, a wireless link in the 868 MHz band.
  • 3 V lithium battery (CR123A / CR17335): replaceable for 5 years or built-in for 10 years, depending on the version.
  • 104 × 73.5 × 36.4 mm housing.
  • Works from -10 to 40 °C at up to 95 % humidity, non-condensing.
  • Meets EN50291-1:2018, SGS certified.

When carbon monoxide detectors are to become part of the fire alarm in a building, the system is designed under fire alarm installation.

Specifications

General
CertificationsEN50291-1:2018, SGS
Sensor typeElectrochemical
Sensor life10 years
Alarm threshold30 ppm without alarm before 120 min; 50 ppm without alarm before 60 min, with alarm before 90 min; 100 ppm without alarm before 10 min, with alarm before 40 min; 300 ppm with alarm before 3 min
Warm-up timeApprox. 100 seconds
Communication
Wireless protocolRF868
InterconnectionStandalone
Hardware
Sound level≥85 dB (at 3 m)
Alarm indicationAudio and Flash alarm
Power
Power supplyOperating voltage: DC3 V (1 × CR123 A/CR17335 battery); Power supply mode: 5 years Battery (Replaceable); 10 years Battery Built-in
Physical and environment
Dimensions104 × 73.5 × 36.4 mm
Operating temperature-10 °C – +40 °C
Operating humidity≤95%RH (no condensation)

FAQ

What is carbon monoxide (CO) and why is it dangerous?

Carbon Monoxide (CO) is invisible, odorless, and tasteless gas produced by incomplete combustion of carbon-containing fuel (gas, oil, wood, coal). CO is deadly because: 1) invisible and odorless – impossible to detect with human senses. 2) blocks oxygen – CO binds to hemoglobin in blood and blocks oxygen transport in body. 3) fast action – at high concentration (400+ ppm) causes loss of consciousness and death in 1-3 hours. Symptoms: headache, nausea, dizziness, weakness, confusion. CO is called "silent killer" because victim often doesn't realize danger until too late.

Where should I install carbon monoxide detectors?

Correct carbon monoxide detector placement is critical for effective protection. Recommendations: 1) near all bedrooms – detector must be in corridor near all bedrooms (CO poisoning most dangerous during sleep). 2) on all floors – minimum one detector per floor. 3) near gas appliances – detector 1-3m distance from gas stove, water heater, boiler. 4) height – on wall at 1.5-2m height or on ceiling (CO is slightly lighter than air and spreads slowly). 5) avoid – in kitchen directly above stove (false alarms), in bathroom (humidity), near windows/doors (air flow). 6) in garage – if garage connected to house, must install detector.

What should I do if carbon monoxide detector triggers?

If carbon monoxide detector sounds, take following measures immediately: 1) don't ignore – CO detectors rarely give false alarms, take seriously. 2) evacuation – immediately evacuate all people and pets from building to open air. 3) open windows/doors – if safe to do so, open windows and doors for ventilation. 4) don't go back – don't enter building until professional checks. 5) call 112 – call emergency service from open air. 6) medical help – if anyone has symptoms (headache, nausea, dizziness), seek medical attention immediately. 7) check source – gas technician must check all gas appliances and find CO source.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.