Skip to content
Heiman

Heiman HM2RC remote controller

Model
9690

Radio remote in a flat round Φ62.4 × 14.3 mm housing for a wireless fire alarm system: RF433 or RF868, lithium battery rated for 3 years.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
Power supply: DC3 V (Lithium Battery); Power supply mode: 3 years Battery
Wireless protocol
RF433, RF868
Dimensions
Φ62.4 × 14.3 mm
Operating temperature
-10 °C – +50 °C
All specifications

Description

The Heiman HM2RC is a remote controller for a wireless fire alarm system in a flat round housing, 62.4 mm across and 14.3 mm thick.

  • RF433 or RF868 radio, depending on the version.
  • 3 V lithium battery rated for 3 years.
  • Works from -10 to 50 °C at up to 95 % humidity.

The remote is chosen to match the frequency of the alarms and configured during fire alarm installation.

Specifications

Communication
Wireless protocolRF433, RF868
Power
Power supplyPower supply: DC3 V (Lithium Battery); Power supply mode: 3 years Battery
Physical and environment
DimensionsΦ62.4 × 14.3 mm
Operating temperature-10 °C – +50 °C
Operating humidity≤95%RH

FAQ

Why is remote controller needed for fire alarm system?

Remote controller needed for several reasons: silencing false alarms – when something burning on kitchen stove and smoke detector triggered → can silence siren from remote (Mute button) for 10 minutes, no physical access to detector or panel required. Manual alarm activation – if saw fire but smoke detector not triggered yet → can activate alarm from remote (Panic button). System testing – periodic testing (Test button) to ensure system works. Convenience – no physical access to panel required (usually panel on wall or ceiling).

How many remote controllers can connect to one fire system?

Depends on fire system hub or panel model. Standard systems – 4-8 remotes (enough for family, office), each family member or employee individual remote. Large systems – 20-50 remotes (large facilities, hotels, offices), each zone or department individual remotes. Programming: all remotes must be programmed (paired) with hub – usual procedure: on hub press Pairing button → on remote press any button → hub recognizes remote. Recommendation: minimum 2 remotes for each home (one on key fob at entrance, one in bedroom).

What's the difference between 433MHz and 868MHz remote controllers?

433MHz remotes – old standard, widely used, cheap, but more RF interference (many devices use 433MHz – garage remotes, wireless doorbells, toys), possible interference. 868MHz remotes – new standard, less RF interference (fewer devices use 868MHz), more stable connection, larger range (10-20% better), but slightly more expensive. Range: 433MHz – 50-80m inside building, 868MHz – 60-100m inside building. Recommendation: if your area has much RF interference (much Wi-Fi, wireless devices) → choose 868MHz remote (more stable).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.