Skip to content
Heiman

Heiman HM3RC remote controller

Model
9685

Remote controller for a wireless fire alarm system of up to 40 devices: remote alarm testing, silencing and finding the alarm that went off.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Maximum connected devices
40
Card frequency
868.3 MHz / 433 MHz
Power supply
Power supply: DC3 V (Lithium Battery); Power supply mode: 10 years Battery Built-in
Wireless protocol
RF868
Dimensions
99 × 99 × 22 mm
All specifications

Description

The Heiman HM3RC is a remote controller for an RF868 wireless fire alarm system: up to 40 alarms can be tested, silenced and located from one place, with no ladder up to the ceiling.

  • Remote alarm testing.
  • Remote silencing, for example after a false alarm from cooking steam or smoke.
  • Locating the triggered alarm: when every alarm in the system sounds at once, the source can still be found.
  • Up to 40 devices on RF868 radio.
  • Built-in 3 V lithium battery rated for 10 years.
  • 99 × 99 × 22 mm, wall mounted on a bracket or carried as a portable unit.

LAGI pairs the remote with the alarms as part of fire alarm installation.

Specifications

Capacity
Maximum connected devices40
Cards and codes
Card frequency868.3 MHz / 433 MHz
Communication
Wireless protocolRF868
Software and functions
Standard functionsRemotely test alarms, Remotely silence alarms, Locate triggered alarm
Power
Power supplyPower supply: DC3 V (Lithium Battery); Power supply mode: 10 years Battery Built-in
Physical and environment
Dimensions99 × 99 × 22 mm
MountingInstallation positions: Wall Mounting / Portable; Mounting type: Mounting bracket

FAQ

Why is remote controller needed for fire alarm system?

Remote controller needed for several reasons: silencing false alarms – when something burning on kitchen stove and smoke detector triggered → can silence siren from remote (Mute button) for 10 minutes, no physical access to detector or panel required. Manual alarm activation – if saw fire but smoke detector not triggered yet → can activate alarm from remote (Panic button). System testing – periodic testing (Test button) to ensure system works. Convenience – no physical access to panel required (usually panel on wall or ceiling).

How many remote controllers can connect to one fire system?

Depends on fire system hub or panel model. Standard systems – 4-8 remotes (enough for family, office), each family member or employee individual remote. Large systems – 20-50 remotes (large facilities, hotels, offices), each zone or department individual remotes. Programming: all remotes must be programmed (paired) with hub – usual procedure: on hub press Pairing button → on remote press any button → hub recognizes remote. Recommendation: minimum 2 remotes for each home (one on key fob at entrance, one in bedroom).

What's the difference between 433MHz and 868MHz remote controllers?

433MHz remotes – old standard, widely used, cheap, but more RF interference (many devices use 433MHz – garage remotes, wireless doorbells, toys), possible interference. 868MHz remotes – new standard, less RF interference (fewer devices use 868MHz), more stable connection, larger range (10-20% better), but slightly more expensive. Range: 433MHz – 50-80m inside building, 868MHz – 60-100m inside building. Recommendation: if your area has much RF interference (much Wi-Fi, wireless devices) → choose 868MHz remote (more stable).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.