Heiman HM-710N gas detector
- Model
- 9697
Mains-powered gas detector with a siren of at least 75 dB and a connection for an electromagnetic valve that shuts off the gas in an alarm.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Alarm threshold
- 6%±3% LEL
- Compatible devices
- Electromagnetic valve
- Power supply
- AC 100-240 V
- Sound level
- ≥75 dB/1 m Alarm
- Dimensions
- 70 × 110 × 40 mm
- Operating temperature
- 0 °C – +40 °C
Description
The Heiman HM-710N is a gas detector for a kitchen, boiler room or any room with gas appliances. A leak sets off the siren, and a connected electromagnetic valve can shut off the gas supply.
- Alarm threshold 6 % ± 3 % LEL: a small fraction of the lower explosive limit, the gas concentration in air at which the mixture can ignite.
- Siren of at least 75 dB at 1 m.
- Works with an electromagnetic valve.
- AC 100–240 V mains supply.
- 70 × 110 × 40 mm housing, works from 0 to 40 °C; CE marked.
The mounting point depends on the gas: natural gas is lighter than air and gathers under the ceiling, while LPG is heavier and settles near the floor. LAGI connects detector and valve into one system as part of fire alarm installation.
Specifications
| Certifications | CE |
|---|---|
| Alarm threshold | 6%±3% LEL |
| Sound level | ≥75 dB/1 m Alarm |
|---|
| Compatible devices | Electromagnetic valve |
|---|
| Power supply | AC 100-240 V |
|---|
| Dimensions | 70 × 110 × 40 mm |
|---|---|
| Operating temperature | 0 °C – +40 °C |
FAQ
What's the difference between methane and propane detectors?
Methane detectors – detect natural gas (CH4, methane) supplied to homes through pipes, methane is lighter than air and rises up, so detector must be installed on ceiling or upper wall (20-30cm from ceiling), ideal for kitchens, boiler rooms, near gas stoves. Propane/LPG detectors – detect liquefied gas (C3H8 propane, C4H10 butane) stored in cylinders, propane is heavier than air and sinks down, so detector must be installed near floor at 20-30cm height, ideal for homes with LPG cylinders, camping, garages. Important: don't replace methane detector with propane detector and vice versa – they are not interchangeable.
Where should I install gas leak detectors?
Correct gas detector placement depends on gas type. Methane detectors (natural gas): 1) on ceiling or upper wall 20-30cm from ceiling. 2) 1-4m distance from gas appliance (stove, boiler, water heater). 3) don't install directly above stove (false alarms). 4) avoid windows, doors, ventilation openings. Propane/LPG detectors (liquefied gas): 1) near floor at 20-30cm height. 2) 1-4m distance from LPG cylinder or gas appliance. 3) don't install on floor (damage risk). General recommendations: on all floors minimum one detector, in kitchen mandatory, in boiler room mandatory, monthly testing (test button).
What should I do if gas leak detector triggers?
If gas leak detector sounds, take following measures immediately: 1) don't ignore – gas leak is life threat (explosion, fire, poisoning). 2) shut off gas – close main gas valve (usually at gas meter or on cylinder). 3) don't turn on/off electrical devices – any spark can cause explosion. 4) open windows and doors – ventilation to reduce gas concentration. 5) evacuation – evacuate all people and pets from building to open air. 6) call 112 – call emergency service from open air (not from building). 7) gas technician – gas technician must check all gas appliances, pipes and find leak source. Don't enter building until professional checks and confirms it's safe.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.