Skip to content
Heiman

Heiman HM2HIA hearing impaired alarm

Model
9691

Alarm for people with hearing loss: alerts from the wireless alarms in the system, up to 30 devices, mains power with a backup battery.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Maximum connected devices
30 units
Card frequency
868 MHZ
Power supply
Input: 100-240v AC - Output: 12.0 V DC, 0.5 A, 6 W
Wireless protocol
RF433, RF868, RF915
Dimensions
85 × 120 × 30 mm (alarm unit); Φ85 mm (pad)
Operating temperature
-5 °C to +40 °C
All specifications

Description

The Heiman HM2HIA is an alarm for people with hearing loss who may not hear the siren of a fire alarm. The unit has a radio link to up to 30 wireless devices in the system.

  • RF433, RF868 or RF915 radio, depending on the version.
  • Up to 30 connected devices.
  • Alarm unit 85 × 120 × 30 mm and a round Φ85 mm pad.
  • Mains adapter: input 100–240 V AC, output 12 V DC, 0.5 A, 6 W.
  • Rechargeable lithium backup battery with a 5-year life, for power cuts.
  • Works from -5 to 40 °C at up to 90 % humidity, non-condensing.

The unit is added to the same wireless system as the detectors in the home; LAGI selects and sets up the devices as part of fire alarm installation.

Specifications

Capacity
Maximum connected devices30 units
Cards and codes
Card frequency868 MHZ
Communication
Wireless protocolRF433, RF868, RF915
Power
Power supplyInput: 100-240v AC - Output: 12.0 V DC, 0.5 A, 6 W
Backup batteryRechargeable lithium battery (5 year life)
Physical and environment
Dimensions85 × 120 × 30 mm (alarm unit); Φ85 mm (pad)
Operating temperature-5 °C to +40 °C
Operating humidityUp to 90% RH non-condensing

FAQ

Why is special fire alarm necessary for hearing impaired?

Standard fire alarms use only audible siren (85dB) which is not effective for hearing impaired people, especially during sleep. Problem: 1) deaf people can't hear siren. 2) hard of hearing people remove hearing aids during sleep and can't hear siren. 3) in deep sleep siren may not wake. Solution: hearing impaired fire systems use: 1) visual signals – ultra-bright strobe light (177 candela) that flashes and wakes person. 2) tactile signals – vibrating pad under bed that vibrates strongly and wakes person. 3) text messages – LCD screen or smartphone notification that precisely tells what's happening. This provides equal safety for all people.

How does vibrating pad work and how effective is it?

Vibrating Pad (Bed Shaker) is small device placed under bed or under pillow that vibrates strongly during fire. How it works: 1) smoke detector detects smoke and sends signal (wireless RF 433MHz or wired connection). 2) vibrating pad receives signal and starts strong vibration. 3) vibration transfers to bed and wakes person. 4) vibration continues until person turns off or until fire is extinguished. Effectiveness: studies show vibrating pad wakes 95%+ hearing impaired people including in deep sleep. This is most reliable method for hearing impaired. Adjustable intensity allows customizing vibration to individual needs.

Where should I install strobe sirens for hearing impaired?

Correct strobe siren placement is critical for effective warning. Recommendations: 1) in all bedrooms – strobe must be in all bedrooms where hearing impaired person sleeps, on ceiling or wall in direct view from bed. 2) in corridors – strobe in all corridors along evacuation route. 3) in common spaces – strobe in kitchen, living room, bathroom. 4) height – 2.4-3m height on ceiling or upper wall, 360° visibility. 5) intensity – minimum 177 candela for bedrooms (ADA standard). 6) flash frequency – 1Hz (one flash per second), white or red light. 7) synchronization – all strobes must flash synchronously (not opposite to each other). Important: strobe alone is not sufficient for bedrooms – must add vibrating pad.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.