Skip to content
Heiman

Heiman HM-638PH smoke detector

Model
9668

Optical smoke detector on 100–240 V mains with a built-in 10-year backup battery, RF868 radio and an optional hard-wired interlink.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sensor type
Photoelectric
Power supply
Power supply: AC100-240 V with backup Sealed battery; Power supply mode: 10 years Battery Built-in
Wireless protocol
RF868
Interconnection
Standalone/Hardwire Inter-linked (optional)
Sound level
≥85 dB (at 3 m)
Dimensions
143 × 143 × 39 mm
All specifications

Description

The Heiman HM-638PH is an optical smoke detector powered from the AC 100–240 V mains. A built-in sealed battery rated for 10 years provides backup during power cuts.

  • Photoelectric sensor, siren of at least 85 dB at 3 m.
  • RF868 radio.
  • Standalone operation or optional hard-wired interlink: in an alarm, the sirens of all linked detectors sound.
  • 143 × 143 × 39 mm housing, wall or ceiling mounting on a bracket.
  • Works from 4.4 to 37.8 °C at up to 95 % humidity, non-condensing.
  • Meets EN14604:2005/AC:2008.

A mains cable has to reach each mounting point; LAGI runs the cabling and links the detectors as part of fire alarm installation.

Specifications

General
CertificationsEN14604:2005/AC:2008
Sensor typePhotoelectric
Communication
Wireless protocolRF868
InterconnectionStandalone/Hardwire Inter-linked (optional)
Hardware
Sound level≥85 dB (at 3 m)
Power
Power supplyPower supply: AC100-240 V with backup Sealed battery; Power supply mode: 10 years Battery Built-in
Physical and environment
Dimensions143 × 143 × 39 mm
MountingInstallation positions: Wall mounting/Ceiling mounting; Mounting type: Mounting bracket
Operating temperature4.4 °C – 37.8 °C (40°F~100°F)
Operating humidity≤95%RH (no condensation)

FAQ

What's the difference between optical and ionization smoke detectors?

Optical (photoelectric) detectors – use LED light and photodiode, detect smoke particles by light scattering, ideal for slow smoldering fires (furniture, fabric), fewer false alarms, safe (no radioactive material), recommended for residential homes. Ionization detectors – use radioactive source (Americium-241), detect invisible smoke particles, ideal for fast flaming fires (paper, gasoline), faster response, but more false alarms. Recommendation: optical – residential homes, offices. Ionization – kitchens, warehouses. Dual sensor – best option (both fire types).

Where should I install smoke detectors?

Correct smoke detector placement is critical for effective protection. Recommendations: 1) in all bedrooms – detector must be in all bedrooms and in corridor near bedrooms. 2) on all floors – minimum one detector per floor including basement and attic. 3) on ceiling – detector must be installed on ceiling or on wall 10-30cm from ceiling (smoke rises up). 4) avoid – kitchen (false alarms when cooking), bathroom (steam), windows/doors (air flow). 5) distance – maximum 10-15m distance between detectors. 6) testing – monthly press test button and ensure siren works.

How often should I replace smoke detector battery?

Smoke detector battery life depends on type. Standard 9V battery – 6-12 months, detector beeps when battery weakens (one beep every 30-60 seconds), replace immediately. 10-year lithium battery – 10 years, built into detector, no replacement needed, after 10 years replace entire detector. AC power (220V) + backup battery – backup battery 1-2 years. Recommendation: replace battery twice per year (when changing clocks), replace entire detector after 10 years (sensor ages and loses accuracy).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.