Skip to content
Heiman

Heiman HM2SA-5 standalone smoke detector

Model
9669

Standalone optical smoke detector with RF433 or RF868 radio, a siren of at least 85 dB and a 10-year lithium battery in a 31 mm high housing.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sensor type
Photoelectric
Power supply
Power supply: DC3 V (Lithium Battery); Power supply mode: 10 years Battery (Built-in/Replaceable)
Wireless protocol
RF433, RF868
Interconnection
Standalone
Sound level
≥85 dB (at 3 m)
Dimensions
Φ86 × 31 mm
All specifications

Description

The Heiman HM2SA-5 is a standalone smoke detector with a radio link: optical sensor, siren and battery in a flat housing 31 mm high, for ceiling or wall mounting.

  • Optical (photoelectric) sensor, triggered by smoke particles in the chamber.
  • RF433 or RF868 radio, depending on the version.
  • Siren of at least 85 dB at 3 m, red LED indicator.
  • 3 V lithium battery rated for 10 years, built-in or replaceable depending on the version.
  • 86 mm across, 31 mm high; works from 0 to 55 °C at up to 95 % humidity.
  • Meets EN14604:2005/AC:2008, with DBI, CNPP and NF certificates.

EN14604 is the European standard for standalone smoke alarms. LAGI plans detector positions room by room and sets up the radio links as part of fire alarm installation.

Specifications

General
CertificationsEN14604:2005/AC:2008, DBI, CNPP, NF
Sensor typePhotoelectric
Communication
Wireless protocolRF433, RF868
InterconnectionStandalone
Hardware
Sound level≥85 dB (at 3 m)
Alarm indicationRed LED indicator
Power
Power supplyPower supply: DC3 V (Lithium Battery); Power supply mode: 10 years Battery (Built-in/Replaceable)
Physical and environment
DimensionsΦ86 × 31 mm
MountingWall mounting or ceiling mounting
Operating temperature0 °C – +55 °C
Operating humidity≤95%RH (non-condensing)

FAQ

What's the difference between optical and ionization smoke detectors?

Optical (photoelectric) detectors – use LED light and photodiode, detect smoke particles by light scattering, ideal for slow smoldering fires (furniture, fabric), fewer false alarms, safe (no radioactive material), recommended for residential homes. Ionization detectors – use radioactive source (Americium-241), detect invisible smoke particles, ideal for fast flaming fires (paper, gasoline), faster response, but more false alarms. Recommendation: optical – residential homes, offices. Ionization – kitchens, warehouses. Dual sensor – best option (both fire types).

Where should I install smoke detectors?

Correct smoke detector placement is critical for effective protection. Recommendations: 1) in all bedrooms – detector must be in all bedrooms and in corridor near bedrooms. 2) on all floors – minimum one detector per floor including basement and attic. 3) on ceiling – detector must be installed on ceiling or on wall 10-30cm from ceiling (smoke rises up). 4) avoid – kitchen (false alarms when cooking), bathroom (steam), windows/doors (air flow). 5) distance – maximum 10-15m distance between detectors. 6) testing – monthly press test button and ensure siren works.

How often should I replace smoke detector battery?

Smoke detector battery life depends on type. Standard 9V battery – 6-12 months, detector beeps when battery weakens (one beep every 30-60 seconds), replace immediately. 10-year lithium battery – 10 years, built into detector, no replacement needed, after 10 years replace entire detector. AC power (220V) + backup battery – backup battery 1-2 years. Recommendation: replace battery twice per year (when changing clocks), replace entire detector after 10 years (sensor ages and loses accuracy).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.