Skip to content
SESAME

SESAME SBS10 beam sensor

Model
9422

Beam sensor in an IP55 housing protected against dust and water jets: 15–30 m range, 180° rotation, 12–24 V DC power.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Detection range
15-30 M Angle can
Dimensions
100 × 40 × 35 mm
All specifications

Description

The SESAME SBS10 is a beam sensor for a security alarm in an IP55 housing. Breaking the beam across a passage or a stretch of perimeter means an alarm signal at the control panel.

  • Range: 15–30 m; the angle rotates through 180° for aiming the beam.
  • IP55: protected against dust and water jets.
  • Power: 12–24 V DC.
  • 100 × 40 × 35 mm housing.
  • CE, FCC and RoHS certified.

Sensor position and the power cable route are decided during security alarm installation.

Specifications

General
CertificationsCE, FCC, RoHS
Detection range15-30 M Angle can
Physical and environment
Dimensions100 × 40 × 35 mm
Ingress protection (IP)IP55

FAQ

What is pet-immune function in PIR detector?

Pet-immune (or pet-friendly) is function that allows PIR motion detector to ignore pets (dogs, cats) and not trigger false alarm. How it works: detector analyzes object size, weight, and movement speed. If object is small (<15kg or <25kg depending on model) and moves at low height (on floor), detector ignores it. If object is large (human) and moves vertically, detector triggers. This is necessary for homes with pets.

What's the difference between wireless and wired detectors?

Wired detectors – connect to panel with cable, don't need batteries, more reliable connection, cheaper, but require cable installation (difficult installation). Wireless detectors – connect to panel with radio signal (433MHz/868MHz), battery powered (1-3 year life), easy installation (no cables needed), more expensive, but ideal for existing buildings where cable installation is difficult. Recommendation: wired – for new construction, wireless – for existing buildings.

Where should I install PIR motion detector?

Correct PIR detector placement is critical for effective protection. Recommendations: 1) height – 2-2.5m from floor (optimal viewing angle). 2) in corner – install in room corner to cover entire space. 3) at entrance – install facing door/window (entry path). 4) avoid – direct sunlight, heaters, air conditioners (false alarms). 5) testing – after installation test detector from different angles and ensure it covers entire space.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.