SESAME SD-168G gas detector
- Model
- 9427
Wired gas detector for an alarm system: natural gas, LPG and coal gas, adjustable alarm threshold and a siren louder than 85 dB.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Description
The SESAME SD-168G is a gas detector wired into an alarm system. A leak of natural gas, LPG (propane-butane) or coal gas sets off a local audible alarm and a signal to the system.
- Adjustable alarm threshold: natural gas 0.1–0.3 %, LPG 0.1–0.5 %, coal gas 0.1–0.5 %.
- Siren louder than 85 dB at 1 m.
- 12 V DC power, consumption up to 1.5 W.
- Sensing element life: 3 years.
- Ambient pressure: 86–106 kPa.
Natural gas is lighter than air and LPG heavier, so the mounting height depends on the gas. Position and wiring are worked out during security alarm installation.
FAQ
What is pet-immune function in PIR detector?
Pet-immune (or pet-friendly) is function that allows PIR motion detector to ignore pets (dogs, cats) and not trigger false alarm. How it works: detector analyzes object size, weight, and movement speed. If object is small (<15kg or <25kg depending on model) and moves at low height (on floor), detector ignores it. If object is large (human) and moves vertically, detector triggers. This is necessary for homes with pets.
What's the difference between wireless and wired detectors?
Wired detectors – connect to panel with cable, don't need batteries, more reliable connection, cheaper, but require cable installation (difficult installation). Wireless detectors – connect to panel with radio signal (433MHz/868MHz), battery powered (1-3 year life), easy installation (no cables needed), more expensive, but ideal for existing buildings where cable installation is difficult. Recommendation: wired – for new construction, wireless – for existing buildings.
Where should I install PIR motion detector?
Correct PIR detector placement is critical for effective protection. Recommendations: 1) height – 2-2.5m from floor (optimal viewing angle). 2) in corner – install in room corner to cover entire space. 3) at entrance – install facing door/window (entry path). 4) avoid – direct sunlight, heaters, air conditioners (false alarms). 5) testing – after installation test detector from different angles and ensure it covers entire space.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.