Skip to content
SESAME

SESAME SD-820 gas detector

Model
9426

Wired gas detector with an LED display: alarm at 10 % of the lower explosive limit (LEL), siren louder than 85 dB, 12 V DC power.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Description

The SESAME SD-820 is a wired gas detector for an alarm system, in a round φ104 × 51 mm housing with an LED display.

  • Alarm threshold: 10 % LEL. The lower explosive limit is the concentration of gas in air above which the mixture can ignite; 10 % of that gives an early warning with a wide margin.
  • Siren louder than 85 dB at 1 m.
  • 12 V DC power, consumption up to 1.5 W.
  • Sensing element life: 3 years.

Height and position are chosen for the gas type and room layout during security alarm installation.

FAQ

What is pet-immune function in PIR detector?

Pet-immune (or pet-friendly) is function that allows PIR motion detector to ignore pets (dogs, cats) and not trigger false alarm. How it works: detector analyzes object size, weight, and movement speed. If object is small (<15kg or <25kg depending on model) and moves at low height (on floor), detector ignores it. If object is large (human) and moves vertically, detector triggers. This is necessary for homes with pets.

What's the difference between wireless and wired detectors?

Wired detectors – connect to panel with cable, don't need batteries, more reliable connection, cheaper, but require cable installation (difficult installation). Wireless detectors – connect to panel with radio signal (433MHz/868MHz), battery powered (1-3 year life), easy installation (no cables needed), more expensive, but ideal for existing buildings where cable installation is difficult. Recommendation: wired – for new construction, wireless – for existing buildings.

Where should I install PIR motion detector?

Correct PIR detector placement is critical for effective protection. Recommendations: 1) height – 2-2.5m from floor (optimal viewing angle). 2) in corner – install in room corner to cover entire space. 3) at entrance – install facing door/window (entry path). 4) avoid – direct sunlight, heaters, air conditioners (false alarms). 5) testing – after installation test detector from different angles and ensure it covers entire space.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.