SESAME SDC-52NC/SDC-52NO magnetic door contact
- Model
- 9413
Compact 32 × 15 × 8 mm magnetic door contact, wired to the alarm panel, in versions with an NC or NO contact.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Dimensions
- 32 × 15 × 8 mm
Description
The SESAME SDC-52NC/SDC-52NO is a compact wired magnetic contact for door opening detection. The 32 × 15 × 8 mm contact body goes on the frame and the magnet on the door; the panel sees the opening as a change of zone state.
- 32 × 15 × 8 mm housing.
- Two versions: SDC-52NC with a normally closed contact and SDC-52NO with a normally open one.
- Wired to a zone of the alarm panel.
Zone layout and contact type are matched to the panel during security alarm installation.
Specifications
| Dimensions | 32 × 15 × 8 mm |
|---|
FAQ
What is pet-immune function in PIR detector?
Pet-immune (or pet-friendly) is function that allows PIR motion detector to ignore pets (dogs, cats) and not trigger false alarm. How it works: detector analyzes object size, weight, and movement speed. If object is small (<15kg or <25kg depending on model) and moves at low height (on floor), detector ignores it. If object is large (human) and moves vertically, detector triggers. This is necessary for homes with pets.
What's the difference between wireless and wired detectors?
Wired detectors – connect to panel with cable, don't need batteries, more reliable connection, cheaper, but require cable installation (difficult installation). Wireless detectors – connect to panel with radio signal (433MHz/868MHz), battery powered (1-3 year life), easy installation (no cables needed), more expensive, but ideal for existing buildings where cable installation is difficult. Recommendation: wired – for new construction, wireless – for existing buildings.
Where should I install PIR motion detector?
Correct PIR detector placement is critical for effective protection. Recommendations: 1) height – 2-2.5m from floor (optimal viewing angle). 2) in corner – install in room corner to cover entire space. 3) at entrance – install facing door/window (entry path). 4) avoid – direct sunlight, heaters, air conditioners (false alarms). 5) testing – after installation test detector from different angles and ensure it covers entire space.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.