Skip to content
SESAME

SESAME 110B vehicle loop detector

Model
9420

Single-channel vehicle loop detector for sensing a car over a loop laid in the road surface: 35 ms response, 220 V or 110 V AC power.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
L112 x W73 x H38 mm
All specifications

Description

The SESAME 110B is an inductive loop detector for one loop. A wire loop is laid in the road surface; the metal of a car above the loop changes the inductance, and a signal appears at the detector output for a barrier, a gate or the security system.

  • Response time: 35 ms.
  • 3 sensitivity levels.
  • Power: 220 V or 110 V AC.
  • Operating range -40 to +65 °C.
  • 112 × 73 × 38 mm, 0.3 kg.

The loop, detector and gate automation are tied into one scheme as part of security alarm installation.

Specifications

General
Response time35 ms
Detection sensitivity3 level -40 °C to +65 °C
Physical and environment
DimensionsL112 x W73 x H38 mm
Package dimensions80 × 45 × 120 mm

FAQ

What bracket is needed for PIR sensor installation?

PIR sensor bracket depends on installation location – wall bracket: standard bracket (usually comes with sensor), fixed angle or adjustable angle (0°-90°), mounting with screws or dowels. Corner bracket: special bracket for installation in room corner, 360° view, ideal for small rooms. Ceiling bracket: for installing sensor on ceiling, 360° view, ideal for corridors, halls. Adjustable bracket: allows changing sensor angle after installation, ideal for difficult locations. Tip: use adjustable bracket – allows optimizing view zone after installation.

What's the difference between wireless keypad and key fob?

Wireless keypad – stationary device (mounted on wall at entrance), PIN code control (4-6 digits), RFID card control (card approach), LCD screen (system status, zone status), battery power (1-2 years), ideal for families (multiple users, different codes). Key fob – portable device (carried on key ring), 2-4 buttons (Arm/Disarm/Home/Panic), simple control (one button press), battery power (6-12 months), ideal for quick control (from car, from garden). Differences: keypad more secure (PIN code, RFID), key fob more convenient (quick control). Recommendation: use both – keypad at entrance + key fob for each family member.

Why is power supply with battery (UPS) needed for alarm?

Power supply with battery (UPS) needed for several reasons – during power outage system will continue operation: battery automatically turns on when power cuts off, system will continue operation 8-24 hours (depends on battery capacity), sensors, siren, communication work. Protection function – intruder often starts with cutting power, UPS ensures system won't turn off. Battery capacity: 7Ah – 8-12 hours (small system, 5-10 sensors), 12Ah – 12-18 hours (medium system, 10-20 sensors), 17Ah – 18-24 hours (large system, 20+ sensors). Recommendation: always use UPS – this is main security element of alarm system.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.