SESAME SD-103 strobe siren
- Model
- 9429
Wired indoor strobe siren: 110 dB sound and a flashing light, 12 V DC power, also available in blue.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Description
The SESAME SD-103 is a wired strobe siren for indoor use: in an alarm, a loud sound and a flashing light.
- Sound level: 110 dB.
- Power: 12 V DC, wired to the siren output of the alarm panel.
- Compatible with alarm panels of different models.
- Also available in blue.
Siren positions inside the building are chosen during security alarm installation.
FAQ
Wired or wireless (433/868 MHz) siren – which to choose?
The choice depends on site type and installation complexity. Wired sirens (12V DC) – constant power from panel, no battery replacement needed, cheaper (30-80 GEL indoor, 80-180 GEL outdoor), most reliable, but require cable pulling from panel to siren (difficult in existing buildings). Ideal for: new construction, major renovation, new alarm systems. Wireless 433MHz sirens – battery powered (1-2 years), learning or rolling code for panel pairing, easy installation, price 60-120 GEL. Wireless 868MHz (Grade 2/3) – professional ecosystems (Ajax, Yale, Hikvision), AES 128 encryption, two-way monitoring (panel "sees" that siren is alive), jamming detection, 3-5 year battery, price 180-450 GEL. Recommendation: new site → wired (economical), existing apartment/house → wireless 433MHz (simple), high-security site → Grade 2/3 868MHz (cryptographic protection).
How many decibels are needed for indoor and outdoor sirens?
Decibel selection depends on location and site size – measured at 1 meter distance. Indoor siren: 95-105dB – sufficient for 1-2 room apartment (sound reaches neighbors through thin walls), 110-115dB – 3-4 room apartment or small office (sound reaches all rooms through closed doors), 115dB+ – large house or 200m² office. Outdoor siren: 110dB – villa, garage, small shop (audible within 50-100m radius), 115-120dB – large house, warehouse, commercial site (audible within 100-200m radius), 120dB+ – industrial site, open territory. Note: every +6dB = doubling of perceived loudness, sound power drops by 6dB with each doubling of distance (at 10m 110dB → at 20m ~104dB → at 40m ~98dB). Regulations: in Tbilisi residential zones, noise >85dB during night hours is restricted, but alarm activation is allowed as an exception (emergency situation).
How to connect a siren to the alarm panel?
Wired siren connects to the panel with 4 cables (2×0.75mm² or 2×1mm² 2-pair cable) – 1) +12V (red) – to panel SIREN+ output, 2) GND (black) – to panel SIREN- or GND, 3) TAMPER (yellow/green) – to panel TAMPER zone (NC contact, opening the siren housing → alarm), 4) BATTERY (blue, outdoor sirens only) – internal battery monitoring. Activation: panel activates the +12V SIREN output → siren emits 110-120dB audio + LED strobe. Time limit: panel typically cuts off the siren after 3-15 minutes (regulatory cut-off, to avoid disturbing neighbors at night). Power reserve: outdoor sirens have an internal battery for 6-12 hours (if burglar cuts panel power → siren still works). Panel programming: zone-to-siren mapping (which zone activation → which tone), tone selection (alarm/fire/chime) via DIP switch or panel menu, volume adjustment (low/medium/high).
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.