Skip to content
Heiman

Heiman HS-720ES smart carbon monoxide detector

Model
9593

Carbon monoxide detector for a smart home: siren of at least 85 dB, Matter, Zigbee or Wi-Fi connection, two AA batteries lasting up to 5 years.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sensor life
10 years
Power supply
DC3 V (2 × AA Batteries)
Wireless protocol
Matter, Zigbee, WiFi
Sound level
≥85 dB/3 m
Dimensions
85 × 85 × 27.5 mm
Operating temperature
-10 °C – 40 °C
All specifications

Description

The Heiman HS-720ES is a smart carbon monoxide detector for a house or flat with a gas boiler, water heater, stove or fireplace. Carbon monoxide (CO) has no colour or smell, so a leak goes unnoticed without a detector. At a dangerous concentration the siren sounds and an alert goes over the wireless network to the smart home system and the phone.

  • Matter, Zigbee or Wi-Fi connection, depending on the version. Matter is a common smart home standard for devices from different makers.
  • Siren of at least 85 dB at 3 m.
  • Sensor life of 10 years, battery life of up to 5 years; 3 V from two AA batteries.
  • Warm-up after power-on takes about 100 s.
  • Meets EN50291-1:2018, the European standard for domestic carbon monoxide alarms; SGS certified.
  • 85 × 85 × 27.5 mm housing for wall or ceiling mounting; works from -10 to 40 °C at up to 95 % humidity, non-condensing.

LAGI chooses the mounting spot and links the detector to the gateway and scenes as part of smart home installation.

Specifications

General
CertificationsEN50291-1:2018, SGS
Sensor life10 years
Warm-up timeApprox.100 seconds
Communication
Wireless protocolMatter, Zigbee, WiFi
Hardware
Sound level≥85 dB/3 m
Power
Power supplyDC3 V (2 × AA Batteries)
Battery life5 years
Physical and environment
Dimensions85 × 85 × 27.5 mm
MountingWall mounting or ceiling mounting
Operating temperature-10 °C – 40 °C
Operating humidity≤95%RH (no condensation)

FAQ

What is carbon monoxide (CO) and why is it dangerous?

Carbon Monoxide (CO) is invisible, odorless, and tasteless gas that forms during incomplete combustion – gas heater, furnace, fireplace, car engine. CO is deadly – when inhaled, CO binds to hemoglobin in blood and blocks oxygen transport, causing hypoxia (oxygen deficiency). Symptoms: headache, nausea, dizziness, fatigue. High concentration (400+ PPM) causes heart attack, coma, death in 1-2 hours. CO detector detects gas at early stage and warns you.

Where to install carbon monoxide detector?

CO detector installation rules: bedrooms – one detector in each bedroom (most important, CO poisoning happens during sleep). Gas heater room – detector 1-3m distance from heater. Kitchen – if gas stove, detector 1-3m distance. Garage – if garage connected to house, detector in garage. Height – CO is slightly lighter than air, detector should be at 1.5-2m height (not on ceiling, not on floor). Don't install in kitchen directly above stove (false alarms).

Can CO detector integrate with Smart Home system?

Yes, smart CO detectors integrate with Smart Home systems – Amazon Alexa (voice warning: "Alexa, CO detected in kitchen"), Google Home (voice warning, automation), IFTTT (if CO detected → turn on ventilation, turn off gas heater, send SMS to family members). This allows creating automatic scenarios – when CO detected automatically turns on ventilation, turns off gas heater, sends notification to all family members. Can also integrate with smoke detectors – one app for all safety sensors.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.