Skip to content
Heiman

Heiman HS2WL smart water leak sensor

Model
9618

Water leak sensor with a siren of at least 75 dB and a flashing light, IP67 protection and a Zigbee or Wi-Fi connection.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
DC3 V (Lithium Battery)
Wireless protocol
Zigbee, WiFi
Sound level
≥75 dB/1 m
Dimensions
Φ69 × 27.6 mm
Operating temperature
0 °C – 50 °C
Battery life
5 years
All specifications

Description

The Heiman HS2WL is a smart water leak sensor with a built-in siren. When water appears, the alarm sounds on the spot with a flashing light, while the signal goes over Zigbee or Wi-Fi to the smart home system and the phone.

  • Siren of at least 75 dB at 1 m, plus a flashing light.
  • IP67 protection: dust-tight and safe in brief immersion in water.
  • Zigbee or Wi-Fi, depending on the version.
  • 3 V lithium battery rated for 5 years.
  • Φ69 × 27.6 mm housing; works from 0 to 50 °C at up to 95 % humidity, non-condensing; CE and FCC certified.

LAGI sets up leak sensors and emergency scenes as part of smart home installation.

Specifications

General
CertificationsCE, FCC
Communication
Wireless protocolZigbee, WiFi
Hardware
Sound level≥75 dB/1 m
Alarm indicationAudio and Flash alarm
Power
Power supplyDC3 V (Lithium Battery)
Battery life5 years
Physical and environment
DimensionsΦ69 × 27.6 mm
Ingress protection (IP)IP67
Operating temperature0 °C – 50 °C
Operating humidity≤95%RH (no condensation)

FAQ

How does smart water leak sensor work?

Smart water leak sensor works on electrical conductivity principle and detects water using 2 electrodes: 1) construction – 2 electrodes (metal strips) on floor, distance 5-10mm, when no water → electrodes not connected → circuit open. 2) detection – when water hits floor (depth 0.5mm) → water connects 2 electrodes → circuit closes → sensor detects electrical conductivity → detection time <1 second. 3) notification – sensor sends signal to Wi-Fi/Zigbee network → instant smartphone notification (Push Notification + SMS + call), notification contains: "Water detected!", location (bathroom, kitchen, basement), time and date. 4) audio signal – sensor emits audio signal (85dB beeper), LED indicator lights up (red), so person knows water detected (if smartphone not nearby). 5) automatic shutoff – if you have smart water valve → sensor automatically shuts off main water valve → leak stops → prevent water damage. Advantages: instant detection (<1 second), high sensitivity (0.5mm water), no calibration needed, works with any water (tap water, rain water, sewage water).

How much money will water leak sensor save?

Water leak sensor will save you lots of money preventing water damage: typical water damage – small leak (faucet, toilet, 1-2 hours): water 10-20 liters, damage floor (wood parquet, laminate), damage cost 500-1000 lari (floor replacement). Medium leak (pipe, washing machine, 4-8 hours): water 50-100 liters, damage floor + furniture + equipment, damage cost 2000-5000 lari (floor + furniture + equipment). Large leak (pipe burst, 12-24 hours): water 200-500 liters, damage floor + furniture + equipment + walls + ceiling (neighbors below), damage cost 10000-50000 lari (full renovation + neighbor compensation). How sensor saves – leak starts → sensor detects <1 second → instant smartphone notification → you shut off water valve (or automatic shutoff) → leak stops in 1-5 minutes → water 1-5 liters → damage minimal (cleanup 50-100 lari) → savings 500-50000 lari. Investment: 1 water leak sensor = 30-50 lari, 1 smart water valve = 100-150 lari, total = 130-200 lari. ROI (Return on Investment): if sensor prevents 1 medium leak → savings 2000-5000 lari → ROI 1000-2500% → investment very profitable. Recommendation: install sensors in all risky places (bathroom, kitchen, basement) → prevent water damage → save thousands of lari.

What's the difference between Wi-Fi and Zigbee water leak sensor?

Wi-Fi and Zigbee water leak sensors are both wireless IoT devices, but there are important differences between them: Wi-Fi sensor (2.4GHz) – directly connects to Wi-Fi router, no additional hub/gateway needed, simple setup (connect via smartphone app), more power consumption (battery 6-12 months), ideal for small apartments (1-3 sensors), price 30-50 lari/sensor. Zigbee sensor (2.4GHz Zigbee 3.0) – connects to Zigbee hub/gateway (requires additional device 50-80 lari), low power consumption (battery 1-2 years), mesh network (sensors amplify each other's signal), more stable connection, ideal for large houses (5+ sensors), price 25-45 lari/sensor. Recommendation: small apartment (1-3 sensors) → Wi-Fi sensors (simple, no hub needed), large house (5+ sensors) → Zigbee sensors (better connection, long battery life, economy). If you already have Zigbee smart home system → definitely Zigbee sensors (integration). Extension cable: if need coverage of large area (e.g. basement 10-20m²) → choose sensor with extension cable (1-3m, additional electrodes), 1 sensor will cover 10-20m² area.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.