MUWEITE battery Wi-Fi camera, 3 MP, 9000 mAh
- Model
- 9814
3 MP Wi-Fi camera on a built-in 9000 mAh battery: up to 8 months between charges, PIR wake-up and an IP66 housing.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- Charging Voltage: 5 V ±5%; Power: Micro USB
- Main stream resolution
- 2048 × 1536
- Video codec
- H.264, H.265
- Image sensor
- 1/2.9" CMOS
- Lens
- Focal Length: 3.2 mm; Aperture: F2.2
- Dimensions
- 78 mm × 191 mm × 72 mm (without bracket)
Description
MUWEITE battery Wi-Fi camera, 3 MP, for places with neither a power cable nor a network. Most of the time the camera is in standby; wake-up comes from the PIR sensor or remotely from the app, so the battery lasts for months.
Power
- Non-removable 9000 mAh battery: 8 months with 20 clips of 10 s a day, up to 2 years in standby.
- Consumption: 1.68 mW in standby, 0.88 W by day, 2.23 W at night.
- Charging at 5 V over Micro USB in 15 h; protection against overcharge, over-discharge and short circuit.
Video and sound
- 3 MP (2048 × 1536) at 15 fps, H.265 or H.264, 3.2 mm F2.2 lens with a 128° diagonal view.
- Switchable white light or IR illumination, 0.01 Lux sensitivity.
- Microphone and speaker, full-duplex two-way audio with echo and noise suppression.
Alarms and recording
- Detection of people, vehicles, pets and parcels and an activity zone, with cloud storage enabled.
- On alarm: a push notification, a flashing white LED and a sound alert.
- Alarm-triggered and manual recording to the cloud, a Micro SD card of up to 128 GB or phone memory.
Wi-Fi is 2.4 GHz only; pairing with the Android or iOS app is by QR code. ABS and polycarbonate housing, IP66, 78 × 191 × 72 mm, 350 g; wall, ceiling or desk mounting. Operating range: -10 to 45 °C. The Wi-Fi signal at the mounting point is checked before CCTV installation.
Specifications
| Capacity | 9000 mAh |
|---|
| Wi-Fi | 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) |
|---|---|
| Protocols | TCP/IP, UDP/IP, DHCP, RTMP, MUTP |
| Network setup | Dynamic IP address |
| Memory | Micro SD card |
|---|---|
| Indicators | RGB tri-color LED |
| Buttons | Power key and reset key |
| PIR sensor | PIR body induction wake-up and remote wake-up |
| Alarm notifications | Alarm push by mobile app, white LED flashing and alarm sound warning |
|---|
| Power supply | Charging Voltage: 5 V ±5%; Power: Micro USB |
|---|---|
| Current draw | 1.5 A |
| Power consumption | Standby: 1.68 mW; Daytime Working: 0.88 W; Nighttime Working: 2.23 W |
| Electrical protection | Over-charge, over-discharge, over-current, short circuit and charging protection at high and low temperature |
| Battery | Unremovable |
| Battery life | 8 months (recording 20 pieces of 10-second video per day; pan & tilt unused) |
| Standby time | 2 years |
| Charging time | 15 hours |
| Inputs | Built-in microphone |
|---|---|
| Outputs | Built-in speaker |
| Audio compression | AAC |
| Two-way audio | Full duplex |
| Main stream resolution | 2048 × 1536 |
|---|---|
| Video codec | H.264, H.265 |
| Frame rate | 15 fps |
| Image sensor | 1/2.9" CMOS |
| Lens | Focal Length: 3.2 mm; Aperture: F2.2 |
| Field of view | 128° diagonal, 96° horizontal, 56° vertical |
| Minimum illumination | 0.01 lux |
| Colour mode | White |
| Image settings | 50 Hz, 60 Hz |
| IR LEDs | White light or infrared LED switchable |
| Video analytics | Human detection, vehicle detection, pet detection, package detection, activitiy zone |
| Pan/tilt range | 355° pan, 90° tilt |
| Dimensions | 78 mm × 191 mm × 72 mm (without bracket) |
|---|---|
| Net weight | 350 g |
| Gross weight | 500 g |
| Material | ABS + PC |
| Mounting | Installation Method: Wall mount, ceiling mount, desktop; Bracket Type: 1/4" universal screw hole |
| Ingress protection (IP) | IP66 |
| Operating temperature | -10 °C – 45 °C |
| Storage temperature | -20 °C – 60 °C |
| Recording modes | Alarm triggered recording, and manual recording |
|---|---|
| Video storage | Cloud storage, local Micro SD card (up to 128 GB), and mobile phone memory |
Used in solutions
- Security systems for private houses See the solution
- Security systems for apartment buildings See the solution
- Security systems for hotels and guesthouses See the solution
- Security systems for shops See the solution
- Security systems for offices See the solution
- Security systems for schools and kindergartens See the solution
FAQ
What's the difference between 2MP, 4MP, and 8MP cameras?
Resolution determines detail clarity: 2MP (1920×1080) is sufficient for general monitoring, 4MP (2560×1440) provides better detail for facial and license plate recognition, 8MP (3840×2160, 4K) delivers maximum clarity for digital zoom.
What is PoE and why is it convenient?
PoE (Power over Ethernet) allows you to transmit power and video signal over a single Ethernet cable. This simplifies installation, reduces costs, and enables camera placement anywhere without access to electrical outlets.
What is Smart AI analytics and how does it work?
Smart AI analytics uses artificial intelligence to recognize objects: humans, vehicles, animals. The camera sends alerts only for real threats (person entered restricted zone), ignoring tree movement, shadows, animals – false alarms reduced by 95%.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.