Skip to content
MUWEITE

MUWEITE Tuya 8CH Wi-Fi CCTV kit

Model
9761

Kit with 8 wireless cameras: a house or office covered on all sides without running network cable. Automatic camera pairing, one-button setup.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
Power: [email protected] A; Power supply: DC +12 V /2 A
Main stream resolution
Max.Image Resolution: 1920 × 1080@20 fps; Image Resolution: Main stream (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720, 720 × 576, 640 × 480)
Video codec
H.265 Main Profile/H.264 Main Profile/M-JPEG; H.265 High Profile/ H.264 Main Profile
Image sensor
1/2.9" 2.0M Pixel CMOS
Lens
Lens: 4 mm, horizontal field of view: 75°; Lens Mount: M12
Video output
720P60, XGA,1080P60; 1ch HDMI, 1ch VGA output
All specifications

Description

The MUWEITE Tuya 8CH Wi-Fi is a CCTV kit with a network video recorder (NVR) and eight wireless IP cameras. Eight points cover the perimeter of a house, or an office entrance, corridors and stockroom, with no network cable run across the site: each camera needs only power.

Eight cameras on one Wi-Fi link

All cameras link to the recorder in the 2.4 GHz band through 2 × 2 MIMO antennas. In the open the range is over 800 m and through a wall over 30 m, but every wall and floor shortens the range. Camera and recorder positions are therefore chosen with a signal check.

Cameras and recording

  • 2 MP 1/2.9" sensor, up to 1920 × 1080, 4 mm lens with a 75° view.
  • Colour at 0.01 Lux, IR illumination at night, IR Cut filter, digital WDR.
  • H.265 or H.264 compression, 32 Kbps to 10 Mbps stream.
  • SATA disk of up to 4 TB; continuous, manual, motion or alarm recording.
  • Alarm alerts to a phone, e-mail or FTP; Android and iOS viewing over P2P.

The recorder connects to the router through the RJ45 port; consumption without a disk is 5 W. Signal checks and camera layout are part of CCTV installation.

Specifications

Communication
Ethernet1 × RJ45 10M/100M Adaptive Ethernet port
Wi-FiWireless: Frequency:2.4G; Frequency: 2.4G; Antenna Structure: 2 × 2MIMO
Communication distanceMore than 800 meters with no obstacle, more than 30 meters if penetrate the wall, the actual transmission distance according to the situation
USB2 × USB 2.0 port
ProtocolsProtocols: TCP/IP, HTTP, NTP, IGMP, DHCP, UDP, SMTP, RTP, RTSP, ARP, DDNS, DNS, P2P; Protocol: TCP/IP, HTTP, DHCP, UDP, RTP, RTSP, FTP, NTP, ONVIF, SADP, P2P
ONVIFNon- Support
P2P / cloudAndroid, IOS
Hardware
Operating systemEmbedded Linux
Power
Power supplyPower: [email protected] A; Power supply: DC +12 V /2 A
Power consumption5 W (Without HDD)
Audio
Audio compressionG711, PCM; G.711
Video
Main stream resolutionMax.Image Resolution: 1920 × 1080@20 fps; Image Resolution: Main stream (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720, 720 × 576, 640 × 480)
Video codecH.265 Main Profile/H.264 Main Profile/M-JPEG; H.265 High Profile/ H.264 Main Profile
Image sensor1/2.9" 2.0M Pixel CMOS
LensLens: 4 mm, horizontal field of view: 75°; Lens Mount: M12
Minimum illuminationColor: 0.01 Lux@(F1.2, AGC ON); B/W: 0.001 Lux@(F1.2, AGC ON),0 Lux @ (IRled ON)
Video output720P60, XGA,1080P60; 1ch HDMI, 1ch VGA output
Electronic shutter1/5 - 1/20,000s
Day/night modeDay / Night / External control (IR Cut Filter)
Wide dynamic range (WDR)Digtal Wide dynamic range
Noise reduction (DNR)2DNR,3DNR
White balanceAuto/Manual /ATW/Indoor/Outdoor/Daylight lamp/Sodium lamp
Video S/N ratio≥39 dB
Automatic gain control (AGC)Auto / Manual
Privacy masking4 privacy masks programmable
Motion detectionMotion detect
Video bitrateCBR/VBR, bitrate: 32 Kbps~10 Mbps variable
Video input4 × 3MP/4 × 1080P/4 × 960P/4 × 720P
Physical and environment
Dimensions38 × 38 × 5 mm
Operating temperature-30 °C – 60 °C, Humidity≤90%RH (Unsupport-condensing)
Operating environmentTemperature:-10 °C-+55 °C, Humidity:10%-90%RH
Recording and storage
Recording modesManual/Alarm/Video Detection/Continuous
Playback4 × 3MP
BackupNetwork backup, USB hard disk
HDD bays1 SATA (Up to 4 TB)
Video storagenetwork

FAQ

What's included in a video kit?

Standard kit contains: 1) cameras (2-16 pcs) with IR night vision, 2) DVR/NVR recorder with corresponding channel count, 3) coaxial or Ethernet cables (20-50m per camera), 4) power supplies for cameras, 5) mounting brackets and hardware, 6) mouse and remote for recorder. HDD disk sometimes included, sometimes sold separately.

What's the difference between IP and HD analog kits?

IP kits contain PoE NVR and IP cameras – higher resolution (4MP-8MP), AI features, one Ethernet cable for power and data. HD analog kits contain DVR and AHD/TVI cameras – cheaper (30-40% less), simpler installation, coaxial cables.

Can I expand the kit in the future?

Yes, most kits feature recorders with additional channels. For example, a 4-camera kit may contain an 8-channel recorder – you can add 4 more cameras in the future. You can also replace the HDD disk with larger capacity.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.