Skip to content

How to choose a video door phone for a home or building

Analog, two-wire or IP, the outdoor panel and the monitor, answering from your phone, the gate lock and existing wiring. How to choose a video door phone.

5 min read

Video intercom panel on a gate post, an indoor monitor and a phone showing a courier with a parcel

To choose a video door phone, first decide where it will work: in an apartment in a shared building, in a house with a garden gate, or at the main entrance of an apartment building. That decides the type of system, the outdoor panel and the lock it opens. The indoor monitor is chosen last, once the layout is clear.

An apartment in a shared building

Most apartment buildings already have a shared intercom with a panel at the main door. An apartment video monitor can connect to it if the system is compatible, sometimes through an interface module. You then see the visitor at the main entrance and let them in. If the shared system is old or incompatible, a separate kit goes at the apartment door: a panel on the landing and a monitor in the hallway. The landing is common property, so agree the panel with your neighbours or the owners' association.

A house

At a house, the outdoor panel goes on the garden gate and the monitor indoors. The distance from the gate to the house, and whether a cable already runs there, decide the system type. The panel opens the gate lock and, through a second relay, the driveway gates if they are automated. With two entrances, a second panel is added. Garden gates usually get an electromechanical lock, which stays locked without power.

A building entrance for all apartments

An entrance panel for a whole building has a keypad or a list of apartments and a fob reader. Modern IP systems send the call to the monitor in the apartment and to an app on the resident's phone, so they can let a courier in from anywhere. The owners' association decides on such a system and arranges fobs and maintenance.

Analog, two-wire or IP

ParameterAnalog four-wireTwo-wireIP
CableFour cores from panel to monitorTwo cores, can reuse old doorbell or audio intercom wiringTwisted pair, often powered over PoE
Answering from a phoneOnly with a Wi-Fi monitorDepends on the monitorYes, in the app
Panels and monitorsA small numberSeveral monitors on one linePractically unlimited
Links with cameras and access controlLimitedLimitedFull
Where it fitsAn apartment, a small houseReplacing an old intercom without new wiringA house with a long cable run, a building entrance, an office

An analog kit is the easiest to fit in an apartment. A two-wire system helps when new cable cannot go in but the old two cores are sound. An IP intercom is the choice if you want phone answering, several panels and links with cameras and access control.

The outdoor panel

  • Camera field of view. A wide view shows an adult, a child and a parcel at the gate.
  • Night vision. Infrared or white light is needed if the gate is unlit.
  • Housing. Outdoors it needs protection against water and dust and a metal body that a kick will not break.
  • Rain hood. It shields the lens from rain and direct sun.
  • Built-in reader or keypad. Family members then open the gate with a fob or a code.
  • Height. The panel goes about 1.5 m above the ground, so the camera catches the face.

The monitor

A 7-inch screen is usually enough. Useful extras are recording calls and motion to a memory card, an intercom link between monitors in different rooms, and an input for an extra CCTV camera, for example on the yard. A Wi-Fi monitor forwards calls to your phone, but only with a stable home internet connection.

The lock and opening

An electromechanical lock on a garden gate stays locked without power and opens with a short pulse from the intercom or with a key. A magnetic lock holds the door while it has power, so an exit button goes on the inside. The lock usually needs its own power supply, because the panel cannot power it. Our article types of access control systems covers lock types and how an intercom works with access control. Models are in the locks section of our catalog.

What to do with existing wiring

If the house already has a cable from an old doorbell or audio intercom, check how many cores it has and what state they are in. Two sound cores let you fit a two-wire video intercom without chasing the walls. If the cable is thin, damaged or runs to the gate through the ground unprotected, new twisted pair and an IP system are the safer choice. Wireless intercoms remove the cable between gate and house, but their range and battery life are limited.

How we install video door phones

A LAGI engineer checks the existing wiring, the distance to the gate and the type of door, then proposes a system that fits without unnecessary building work. Site surveys in Tbilisi are free. We carry out the intercom installation: we fit the panel, the monitor and the lock, set up the app and issue the fobs. Models with full specifications are in our video door phones section. To find out the cost, send a quote request.

Frequently asked questions

Which video door phone is best for a house?

A house suits a kit with an outdoor panel on the garden gate, a monitor indoors and an electromechanical lock that stays locked without power. If a two-core cable already runs to the gate, a two-wire system is convenient. If new cable is being laid or you want phone answering, an IP video intercom is the better choice.

Can I answer the intercom from my phone?

Yes, with an IP video intercom or a Wi-Fi monitor. The call from the panel arrives in the app, and you see the visitor, talk to them and open the gate from anywhere. This needs a stable internet connection at home and a strong Wi-Fi signal where the monitor is mounted.

Can an apartment have its own video intercom if the building already has one?

Yes. If the building's system is compatible, the video monitor connects to it, sometimes through an interface module, and opens the main entrance from the apartment. If the system is old or incompatible, a separate kit goes at the apartment door, with a panel on the landing and a monitor in the hallway.

Does a wireless video intercom need any cable?

Usually at least for power. The panel and the monitor need electricity, and battery models have to be recharged regularly. What is wireless is the link between panel and monitor. Its range is limited and drops with walls and fences, so for a gate far from the house, cable is more reliable.

Want an engineer to look at your property?

Book a site survey: we will inspect the property and prepare a quote.