Skip to content
ZKTeco

ZKTeco SRB relay module

Model
9536

Single-door relay module: the lock command comes over encrypted Wiegand from a ZKTeco standalone device, and the lock and exit button are wired to the module.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
50 X 40 X 17mm
Power supply
12V DC, 60mA
Operating temperature
0 - 70 °C
All specifications

Description

The ZKTeco SRB (Security Relay Box) is a single-door relay module for ZKTeco standalone devices with a Wiegand output. The lock and exit button are wired to the module, and the open command arrives over encrypted Wiegand.

Wiegand is a standard wired interface that carries the card number from a reader to a controller. In the SRB the signal is encrypted, so a lock command is harder to fake.

  • One lock relay output and an exit button input.
  • Lock delay 5 s by default, set on the fingerprint reader or in the software.
  • Two LED indicators.
  • 12 V DC, 60 mA power.
  • 50 × 40 × 17 mm, operating range 0 to 70 °C, 10–90 % humidity.

The module, lock and standalone terminal are wired together during access control installation.

Specifications

Access control
Access control interfacesElectric lock, Exit button
Lock relay output1
Readers supportedZKTeco standalone devices that have wiegand out
Output formatEncrypt wiegand
Lock delayDefault 5s (Configurable on fingerprint reader / Software)
Hardware
Display2 LED indicator
Power
Power supply12V DC, 60mA
Physical and environment
Operating humidity10% - 90%
Dimensions50 X 40 X 17mm
Operating temperature0 - 70 °C

FAQ

Why is relay needed in access control system?

Relay needed for several reasons: controller protection – access controller output is low power (100-200mA), electronic locks require high current (1-3A), if directly connect lock to controller – controller will burn. Electrical noise isolation – electronic locks create electrical noise (EMI), relay isolates controller from this noise. Multiple lock management – with one controller output can manage multiple locks through relays. Fail-Safe/Fail-Secure – relay allows changing lock logic.

What's the difference between NO and NC relay contacts?

NO (Normally Open) contacts – normally open, when relay off contacts open (no connection), when relay turns on contacts close (connection appears). Used for Fail-Secure locks – during power outage lock is closed. NC (Normally Closed) contacts – normally closed, when relay off contacts closed (connection exists), when relay turns on contacts open (connection breaks). Used for Fail-Safe locks – during power outage lock is open (fire safety).

How to connect relay to access controller?

Relay connection: controller output → relay input – connect controller Relay Output (usually NO/COM terminals) to relay coil (Coil Input, usually + and - terminals). Power supply → relay – connect 12V/24V DC power supply to relay (in some models power comes from controller). Relay output → electronic lock – connect relay NO/NC contacts to electronic lock and power supply. When controller sends signal (card read) → relay turns on → lock opens.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.